Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Parameters
| Value | Units | Test Method / Conditions | |
| Izod Impact, Notched (-30°C) | 20.0 | kJ/m | ISO 180/1A |
| Izod Impact, Notched (23°C) | 50.0 | kJ/m | ISO 180/1A |
| Izod Impact, un-notched (-30°C) | NB | kJ/m | ISO 180/1 |
| Izod Impact, un-notched (23°C) | NB | kJ/m | ISO 180/1U |
| Strain at Break (23°C) | min. 20 | % | ISO 527 |
| Tensile Modulus (23°C) | 2250.0 | MPa | ISO 527 |
| Yield Strength (23°C) | 65.0 | MPa | ISO 527 |
| Value | Units | Test Method / Conditions | |
| Abbreviation | PC | — | ISO 1043 |
| Density | 1.19 | g/cm3 | ISO 1183 |
| Melt Flow Rate (1.2kg, 300°C) | 12.0 | g/10 | ISO 1133 |
| Moisture Content | max. 0.1 | % | ISO 15512 |
| Molding Shrinkage (Parallel / Normal) | 0.5 | % | ISO 15512 |
| Moisture Absorption (50% RH, 23°C) | 0.2 | % | ISO 62 |
| Value | Units | Test Method / Conditions | |
| Heat Deformation Temperature (0.45 MPa ) | 125.0 | °C | ISO 75 |
| Heat Deformation Temperature (1.80 MPa) | 115.0 | °C | ISO 75 |
| Vicat Softening Temperature (50N) | 140.0 | °C | ISO 306 |
| Value | Units | Test Method / Conditions | |
| Comparative Tracking Index (Solution A) | 225.0 | V | IEC 60112 |
| Surface Resistivity | 1.0e+15 | Ohm | IEC 60093 |
| Volume Resistivity | 1.0e+15 | Ohm. cm | IEC 60093 |
| Value | Units | Test Method / Conditions | |
| Flame Rating (1.6mm) | HB | — | UL 94 |
| Glow Wire lgnitability Temperature (2 mm plaque) | 825.0 | °C | IEC 60695 |
| Flame Rating (0.75 mm) | HB | — | UL 94 |
| Value | Units | Test Method / Conditions | |
| Back Pressure | Low | — | — |
| Drying | 120 / 3 - 4 | °C/hr | — |
| Feed Throat Temperature | 60 - 80 | °C | — |
| Hold Pressure | 60 - 120 | — | — |
| Injection Speed | Medium - Fast | — | — |
| Mold Temperature | 80 - 100 | MPa | — |
| Processing Temperature | 260 - 300 | °C | — |
Regulatory & Compliance
- Certifications & Compliance