Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application
It should be applied in small amounts to one surface only. The absence of oxygen starts the curing process of the polymer. Pressure need only be applied for several seconds. The RC 8000 Series cures rapidly to a moderate strength allowing for bonded parts to be handled within 2 to 40 minutes depending upon which product is chosen.
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Gap Fill (at 25°C) | 5.0 | mil | — |
| Cure Speed (Full cure, at 25°C) | 8.0 | h | — |
| Viscosity (at 25°C) | 125.0 | cps | — |
| Shear Strength (at 25°C) | 3800.0 | psi | — |
| Temperature Range | -65 to 350 | °F | — |
| Cure Speed (Fixture, at 25°C) | 15.0 | min | — |
| S.G. (at 25°C) | 1.1 | — | — |
Technical Details & Test Data
- Peparation
For best results and optimum adhesive performance, surface should be clean and free from contaminants. Contaminants can be removed by using suitable solvents. When using a cleaning solvent, first check for material compatibility particularly in case of plastics. An easy method for removing contaminants is by using a clean soft cloth and wiping the surface with acetone or alcohol.
Storage & Handling
- Shelf Life
All of the Resinlab anaerobic products have a shelf life of one year when stored at 40 °F. Shelf life at room temperature (72 °F) is a minimum of six (6) months. When stored in a refrigerator, allow the adhesive to gradually warm to room temperature prior to use. Avoid heat or storage over 100 °F, direct sunlight and high moisture areas when storing. Avoid contaminating open containers. Do not return unused adhesive to original container.
- Handling Precautions
All of the Resinlab Series anaerobic products are non-toxic and do not constitute a health hazard. Normal precautions should be observed. Use in area where there is adequate ventilation. KEEP AWAY FROM CHILDREN. Should eye contact occur, flush with water for 15 minutes and obtain medical attention.