Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
- Strains
Multi-strain Spore Blend
Features & Benefits
- Labeling Claims
- Advantages
- Controls waste andodors without the use of chemicals
- Eco-friendly
- Contains both anaerobic and facultative bacterial
- Contains vitamins to enhance bacterial growth
Applications & Uses
- Markets
- Application Area
- Directions
- Directions For Use:
- Complete Directions On Product Label
- Shake Or Mix Well Before Using.
- Septic Tanks / Septic Systems: Use 2 to 4 quarts of L-300 for the initial treatment per 500 gallons of tank capacity. The monthly maintenance dose should be 1 pint for each 5 people using the system per 500 gallons of capacity. Treat drain fields and leach beds by pouring directly into the distribution boxes or vents. SINKS, FLOOR Drains, Urinals And Toilets: Use 2 ounces of L- 300 once per week in every drain and allow to work overnight. For drains that receive large amounts of organic matter (kitchen and floor drains, laundry sinks and drains), increase the treatment to 4 to 6 ounces, as often as every other day. For best results, treat at the end of day or other period of lowest flow. To prevent loosened debris from causing obstructions, always begin the treatment program by treating the lower floors first. Bleach, harsh drain openers and disinfectants may kill the bacteria. Allow several hours after the use of these products, then retreat with digestant.
- Grease Traps: For average size grease traps (about 20 cubic feet capacity), add one quart directly to trap or through drain. Then use one pint per week for maintenance.
- Wet Wells And Lift Stations: Add 1 quart of L-300 per 500 cubic feet directly into wet well. SEWER LATERALS: Laterals are treated during periods of low flow by adding through manholes. Dosage per unit length of lateral will vary with the diameter of the line:
Lateral Diameter Ounces per 500 Feet
8 inches 32 ounces 12 inches 48 ounces 16 inches 64 ounces 20 inches 96 ounces 24 inches 128 ounces - Sinks, floor drains, urinals and toilets: Use 2 ounces per drain per weekly. Allow product to work overnight.
- Portable Toilets: Add 4 ounce through the valve opening, add enough water to cover the bottom.
- Pit toilet: Add one quart per 500 gallons of pit capacity.
- Applications
- Septic Systems And Leach Fields
- Floor Drains
- Sinks
- Wet Wells
- Lift Stations
- Grease Traps
- Sewer Laterals
Properties
- Physical Form
- Appearance
- Liquid
- Fragrance
- Neutral, Fresh Scent
- Typical Properties
| Value | Units | Test Method / Conditions | |
| pH | 6.8 - 7.8 | - | - |
| Effective Ph Range | 4.0 - 11.0 | - | - |
| Effective Temperature Range | 5.0 - 50.0 | °C | - |
Safety & Health
- Caution
May irritate eyes and skin. Avoid contact with eyes and skin. Use gloves and safety glasses when handling. Wash thoroughly after handling. Do not take internally. If in eyes, flush with plenty of cool water for at least 15 minutes. If irritation persists, obtain medical assistance. If on skin, remove contaminated clothing and launder before re-use. Wash skin and hands with soap and water. If swallowed, give person several glasses of water and induce vomiting. Contact physician or poison control center for additional instructions
Packaging & Availability
- Packaging
1 gallon, 4 x 1 gallon case, 5 gallons, 30 gallon, 55 gallon
Storage & Handling
- Shelf Life
- 24 Months