LNP™ COLORCOMP™ Compound D1000EXJ

Identification & Functionality

Additives Included

Heat Stabilizer

Chemical Family

Polycarbonate (PC)

Polymer Name

Polycarbonate (PC)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics,

Polycarbonates

Features & Benefits

Labeling Claims

Food Contact Acceptable

Materials Features

Excellent Aesthetics,

Food Contact Acceptable,

Good Aesthetics,

Good Surface Appearance,

Heat Stabilized,

High Durability,

Low Extractables,

Low Leachable,

Unreinforced

Applications & Uses

Markets

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Healthcare & Pharma,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Building Materials

Pipes & Plumbing

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Healthcare & Pharma — Medical

Dental,

Medical Devices & Assemblies,

Surgical Instruments & Trays

Printing & Packaging — Packaging

Food & Beverage Packaging,

Healthcare Packaging,

Industrial & Transport Packaging,

Non-Food Consumer Packaging

Plastics & Elastomers End Uses

Appliances,

Building Materials,

Consumer Applications,

Dental Applications,

Food Packaging,

Home Appliances,

Hoses,

Medical Devices,

Medical Packaging,

Medical/Healthcare Applications,

Pharmaceutical Packaging,

Pipes,

Surgical Devices,

Surgical Instruments,

Water Management

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Color

Custom

Flame Rating

UL 94 HB

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	62	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	68	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	7	%	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	130	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	2300	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	96	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2340	MPa	ASTM D790
Hardness (Rockwell M) ¹¹	70	—	ASTM D785
Hardness (Rockwell R) ¹¹	118	—	ASTM D785
Tensile Stress (Yield, 50 mm/min) ¹¹	61	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	73	MPa	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	6	%	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	128	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2390	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	93	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	2250	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.2	—	ASTM D792
Density ¹¹	1.19	g/cm³	ISO 1183
Density ¹¹	1.19	g/cm³	ASTM D792
Water Absorption (at 23°C, 24hrs) ¹¹	0.15	%	ASTM D570
Water Absorption (at 23°C, saturated) ¹¹	0.26	%	ISO 62-1
Water Absorption (at 23°C, saturated) ¹¹	0.35	%	ASTM D570
Water Absorption (Equilibrium, at 100°C) ¹¹	0.58	%	ASTM D570
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.5 - 0.7	%	SABIC method
Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹	10.5	g/10 min	ASTM D1238
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.1	%	ISO 62
Melt Volume Rate (at 300°C, 1.2 kg) ¹¹	10	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Vicat Softening Temperature (Rate B/50) ¹¹	143	°C	ISO 306
Vicat Softening Temperature (Rate B/50) ¹¹	154	°C	ASTM D1525
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	126	°C	ASTM D648
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	137	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000078	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000078	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000076	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000076	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 95°C, flow) ¹¹	0.000068	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 95°C, xflow) ¹¹	0.000068	1/°C	ASTM E831
Specific Heat ¹¹	1.25	J/g-°C	ASTM C351
Thermal Conductivity ¹¹	0.19	W/m-°C	ASTM C177
Ball Pressure Test (at 123°C to 127°C) ¹¹	Pass	—	IEC 60695-10-2
Vicat Softening Temperature (Rate B/120) ¹¹	145	°C	ISO 306
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	127	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	130	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	130	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	1.30E+02	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Volume Resistivity ¹¹	min. 1.E+17	Ω.cm	ASTM D257
Dielectric Strength (in air, at 3.2mm) ¹¹	14.9	kV/mm	ASTM D149
Relative Permittivity (50/60 Hz) ¹¹	3.17	—	ASTM D150
Relative Permittivity (1 MHz) ¹¹	2.96	—	ASTM D150
Dissipation Factor (at 50/60 Hz) ¹¹	0.0009	—	ASTM D150
Dissipation Factor (at at 1 MHz) ¹¹	0.01	—	ASTM D150
Comparative Tracking Index (UL, PLC) ¹¹	2	PLC Code	UL 746A
Hot Wire Ignition (PLC 2) ¹¹	min. 1.5	mm	UL 746A
Hot Wire Ignition (PLC 3) ¹¹	min. 1.1	mm	UL 746A
High Ampere Arc Ignition (PLC 1) ¹¹	min. 1.5	mm	UL 746A
High Ampere Arc Ignition (PLC 2) ¹¹	min. 1.1	mm	UL 746A
High Voltage Arc Track Rate (PLC) ¹¹	2	PLC Code	UL 746A

Optical Properties

	Value	Units	Test Method / Conditions
Light Transmission (at 2.54 mm) ¹¹	88	%	ASTM D1003
Haze (at 2.54 mm) ¹¹	1	%	ASTM D1003
Refractive Index ¹¹	1.586	—	ASTM D542

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	3204	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	801	J/m	ASTM D256
Izod Impact (Notched, at -30°C) ¹¹	220	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	88	J	ASTM D3763
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	71	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*4, at -30°C) ¹¹	10	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹	82	kJ/m²	ISO 179/1eU

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	120	°C	—
Drying Time ⁷	3 - 4	Hrs	—
Drying Time (Cumulative) ⁷	48	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	295 - 315	°C	—
Nozzle Temperature ⁷	290 - 310	°C	—
Front - Zone 3 Temperature ⁷	295 - 315	°C	—
Middle - Zone 2 Temperature ⁷	280 - 305	°C	—
Rear - Zone 1 Temperature ⁷	270 - 295	°C	—
Mold Temperature ⁷	70 - 95	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed ⁷	40 - 70	rpm	—
Shot to Cylinder Size ⁷	40 - 60	%	—
Vent Depth ⁷	0.025 - 0.076	mm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94HB Flame Class Rating) ᵖ	min. 0.7	mm	UL 94
Oxygen Index (LOI) ᵖ	25	%	ASTM D2863

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Regional Availability

• Americas
• Asia
• Europe
• North America