LNP™ COLORCOMP™ Compound D1000FL

Identification & Functionality

Additives Included

Mold Release Agent

Chemical Family

Polycarbonate (PC)

Polymer Name

Polycarbonate (PC)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics,

Polycarbonates

Features & Benefits

Labeling Claims

Food Contact Acceptable

Materials Features

Excellent Aesthetics,

Food Contact Acceptable,

Good Aesthetics,

Good Mold Release,

Good Moldability,

Good Surface Appearance,

High Durability,

High Flowability,

Low Extractables,

Low Leachable,

Unreinforced

Applications & Uses

Markets

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Building Materials

Pipes & Plumbing

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Printing & Packaging — Packaging

Food & Beverage Packaging,

Industrial & Transport Packaging,

Non-Food Consumer Packaging

Plastics & Elastomers End Uses

Appliances,

Building Materials,

Consumer Applications,

Food Containers,

Food Packaging,

Home Appliances,

Hoses,

Pipes,

Water Management

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Color

Custom

Flame Rating

UL 94 HB,

UL 94 V2

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	64	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	6	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	2390	MPa	ASTM D638

Physical Properties

	Value	Units	Test Method / Conditions
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.3	%	ASTM D570
Density ¹¹	1.2	g/cm³	ISO 1183

Thermal Properties

	Value	Units	Test Method / Conditions
Thermal Conductivity ¹¹	0.17	W/m-°C	ASTM E1530
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	125	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	125	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	115	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	125	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Comparative Tracking Index (UL, PLC) ¹¹	0	PLC Code	UL 746A
Hot Wire Ignition (PLC 1) ¹¹	min. 6	mm	UL 746A
Hot Wire Ignition (PLC 2) ¹¹	min. 1.5	mm	UL 746A
High Ampere Arc Ignition (PLC 1) ¹¹	min. 3	mm	UL 746A
High Ampere Arc Ignition (PLC 2) ¹¹	min. 1.5	mm	UL 746A
High Voltage Arc Track Rate (PLC) ¹¹	0	PLC Code	UL 746A
Arc Resistance (Tungsten, PLC) ¹¹	7	PLC Code	ASTM D495

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	120	°C	—
Drying Time ⁷	4	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	305 - 325	°C	—
Front - Zone 3 Temperature ⁷	320 - 330	°C	—
Middle - Zone 2 Temperature ⁷	310 - 320	°C	—
Rear - Zone 1 Temperature ⁷	295 - 305	°C	—
Mold Temperature ⁷	80 - 110	°C	—
Back Pressure ⁷	0.2 - 0.3	MPa	—
Screw Speed ⁷	30 - 60	rpm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94V-2 Flame Class Rating) ᵖ	min. 1	mm	UL 94
UL Recognized (94HB Flame Class Rating) ᵖ	min. 2.7	mm	UL 94

Note

• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Regional Availability

• Americas
• Asia
• Europe
• North America