LNP™ COLORCOMP™ Compound MX05486

Identification & Functionality

Chemical Family

Polyolefins,

Polypropylenes (PP)

Polymer Name

Polypropylene (unspecified)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Basic Thermoplastics

Polyolefins

Features & Benefits

Labeling Claims

Food Contact Acceptable,

No Added PFAS

Materials Features

Food Contact Acceptable,

Good Aesthetics,

Good Surface Appearance,

Low Extractables,

Low Leachable,

No Added PFAS,

Unreinforced

Applications & Uses

Markets

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Building Materials

Pipes & Plumbing

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Printing & Packaging — Packaging

Food & Beverage Packaging,

Industrial & Transport Packaging,

Non-Food Consumer Packaging

Plastics & Elastomers End Uses

Appliances,

Building Materials,

Consumer Applications,

Food Packaging,

Home Appliances,

Hoses,

Pipes,

Water Management

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Physical Properties

	Value	Units	Test Method / Conditions
Melt Flow Rate (at 230°C, 2.16 kgf) ¹¹	35	g/10 min	ASTM D1238
Specific Gravity ¹¹	0.9	—	ASTM D792

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	31	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	12	%	ASTM D638
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	1170	MPa	ASTM D790

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	88	°C	ASTM D648

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	32	J/m	ASTM D256

Injection Molding

	Value	Units	Test Method / Conditions
Back Pressure ⁷	0.2 - 0.3	MPa	—
Drying Time ⁷	3 - 4	Hrs	—
Front - Zone 3 Temperature ⁷	205 - 215	°C	—
Melt Temperature ⁷	215 - 220	°C	—
Middle - Zone 2 Temperature ⁷	200 - 210	°C	—
Mold Temperature ⁷	30 - 50	°C	—
Rear - Zone 1 Temperature ⁷	195 - 205	°C	—
Screw Speed ⁷	30 - 60	rpm	—

Note

• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Packaging & Availability

Regional Availability

• Americas
• Asia
• Europe
• North America