Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Injection Molding
- Note
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
| Value | Units | Test Method / Conditions | |
| Tensile Stress (Break) ¹¹ | 117 | MPa | ASTM D638 |
| Tensile Strain (Break) ¹¹ | 1.3 | % | ASTM D638 |
| Tensile Modulus (at 50 mm/min) ¹¹ | 17070 | MPa | ASTM D638 |
| Flexural Stress ¹¹ | 172 | MPa | ASTM D790 |
| Flexural Modulus ¹¹ | 14820 | MPa | ASTM D790 |
| Value | Units | Test Method / Conditions | |
| Density ¹¹ | 1.78 | g/cm³ | ASTM D792 |
| Value | Units | Test Method / Conditions | |
| Drying Temperature ⁷ | 120 - 150 | °C | — |
| Drying Time ⁷ | 4 | Hrs | — |
| Melt Temperature ⁷ | 215 - 230 | °C | — |
| Front - Zone 3 Temperature ⁷ | 225 - 245 | °C | — |
| Middle - Zone 2 Temperature ⁷ | 210 - 225 | °C | — |
| Rear - Zone 1 Temperature ⁷ | 190 - 210 | °C | — |
| Mold Temperature ⁷ | 65 - 90 | °C | — |
| Back Pressure ⁷ | 0.2 - 0.3 | MPa | — |
| Screw Speed ⁷ | 30 - 60 | rpm | — |
Packaging & Availability
- Regional Availability