Products

SABIC's Specialties Business

Matching Product Categories

Plastics

Elastomers

353 Products found on SABIC's Specialties Business

TDSWith TDS

LNP™ LUBRICOMP™ Compound LL004C

Polymer Name:Polyetheretherketone (PEEK)
Processing Methods:Injection Molding
Fillers Included:PTFE
Additives Included:Lubricant (PTFE)
Flexural Modulus:2960.0 - 2960.0 MPa

SABIC's Specialties Business LNP LUBRICOMP LL004C compound is based on Polyetheretherketone (PEEK) resin containing 20% PTFE. Added features of this grade include: Wear Resistant, LNP Clean Compounding Technology.

LNP™ LUBRICOMP™ Compound GFL36L

Polymer Name:Polysulfone (PSU)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber, PTFE
Additives Included:Lubricant (PTFE)
Flexural Modulus:8960.0 - 8960.0 MPa

SABIC's Specialties Business LNP LUBRICOMP GFL36L compound is based on Polysulfone (PSU) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Low Extractable, Wear Resistant.

LNP™ LUBRICOMP™ Compound OCL36A

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Carbon Fiber, PTFE
Additives Included:Lubricant (PTFE)
Flexural Modulus:23160.0 - 23160.0 MPa

SABIC's Specialties Business LNP LUBRICOMP OCL36A compound is based on Polyphenylene Sulfide (PPS) - branched resin containing 30% carbon fiber, 15% PTFE. Added features of this grade include: Electrically Conductive, Wear Resistant.

LNP™ LUBRICOMP™ Compound RFL34

Polymer Name:Polyamide 66 (PA 66)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber, PTFE
Additives Included:Mold Release Agent, Heat Stabilizer, Lubricant (PTFE)

LNP LUBRICOMP RFL34 compound is based on Nylon 6/6 resin containing 20% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.

LNP™ LUBRICOMP™ Compound YL003C

Polymer Name:Thermoplastic Polyester Elastomer
Processing Methods:Injection Molding
End Uses:Industrial Applications, Cell Phones, Tablets, Semiconductor Applications, Electrical/Electronic Applications, Displays, Computer Components, Electrical Components
Density:1270.0 - 1270.0 kg/m³
Strain at Break:90.0 - 90.0 %

SABIC's Specialties Business LNP LUBRICOMP YL003C compound is based on Polyester Elastomer resin containing 15% PTFE. Added features of this grade include: LNP Clean Compounding Technology, Wear Resistant.

LNP™ LUBRICOMP™ Compound UFL36SXP

Polymer Name:Polyphthalamide (PPA)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber, PTFE
Additives Included:Heat Stabilizer, Lubricant (Unspecified), Lubricant (PTFE)
Flexural Modulus:9500.0 - 9500.0 MPa

SABIC's Specialties Business LNP LUBRICOMP UFL36SXP compound is based on Polyphthalamide (PPA) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Internally Lubricated, Wear Resistant, Heat Stabilized.

LNP™ LUBRICOMP™ Compound YP003

Polymer Name:Thermoplastic Polyester Elastomer
Processing Methods:Injection Molding
End Uses:Recreational Vehicle Components, Electronic Components, Containers, Displays, Computer Components, Tarpaulins, Pool Covers, Sporting Goods, Turf Applications, Air Cabin Interior, Windows, Appliances, Consumer Applications, Electrical Components, Commercial Appliance, Aerospace Applications, Air Conditioner, Personal Accessories, Cell Phones, Tablets, Garden Equipment, Electrical/Electronic Applications, Lawn Equipment, Building Materials, Home Appliances, Doors
Density:1270.0 - 1270.0 kg/m³
Flexural Modulus:260.0 - 260.0 MPa

LNP LUBRICOMP YP003 compound is based on Polyester Elastomer resin containing 15% PTFE/silicone. Added features of this grade include: Wear Resistant.

LNP™ LUBRICOMP™ Compound DFL329

Polymer Name:Polycarbonate (PC)
Additives Included:Flame Retardant, Lubricant (PTFE)
Fillers Included:PTFE, Glass Fiber
Processing Methods:Injection Molding
Flexural Modulus:4270.0 - 4270.0 MPa

SABIC's Specialties Business LNP LUBRICOMP DFL329 compound is based on Polycarbonate (PC) resin containing 10% glass fiber, 15% PTFE. Added features of this grade include: Flame Retardant, Wear Resistant.

LNP™ LUBRICOMP™ Compound KFL32R

Polymer Name:Polyacetal Copolymer (POM)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber, Silicone Oil, PTFE
Additives Included:Mold Release Agent, Lubricant (PTFE)
Flexural Modulus:4820.0 - 4820.0 MPa

SABIC's Specialties Business LNP LUBRICOMP KFL32R compound is based on Acetal (POM) Copolymer resin containing 10% glass fiber, 15% PTFE. Added features of this grade include: Easy Release, Wear Resistant.

LNP™ LUBRICOMP™ Compound DL002ER

Polymer Name:Polycarbonate (PC)
Additives Included:Mold Release Agent, Lubricant (PTFE)
Fillers Included:PTFE
Processing Methods:Injection Molding
Flexural Modulus:2060.0 - 2060.0 MPa

SABIC's Specialties Business LNP LUBRICOMP DL002ER compound is based on Polycarbonate (PC) resin containing 10% PTFE. Added features of this grade include: Wear Resistant, Easy Molding, Mold Release.

LNP™ LUBRICOMP™ Compound ZX05506

Polymer Name:PPO/PS Alloy
Processing Methods:Injection Molding
Density:1350.0 - 1350.0 kg/m³
Flexural Modulus:4960.0 - 4960.0 MPa

SABIC's Specialties Business LNP LUBRICOMP ZX05506 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 15% graphite powder, 5% PTFE, 20% minerals. Added features of this grade include: Wear Resistant.

LNP™ LUBRICOMP™ Compound LCL33E

Polymer Name:Polyetheretherketone (PEEK)
Processing Methods:Injection Molding
Fillers Included:Carbon Fiber, PTFE
Additives Included:Lubricant (PTFE)

SABIC's Specialties Business LNP LUBRICOMP LCL33E compound is based on Polyetheretherketone (PEEK) resin containing 15% carbon fiber, 15% PTFE. Added features of this grade include: Easy Molding, Wear Resistant, Electrically Conductive.

LNP™ LUBRICOMP™ Compound QFL36

Polymer Name:Polyamide 610 (PA 610)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber, PTFE
Additives Included:Mold Release Agent, Heat Stabilizer, Lubricant (PTFE)

LNP LUBRICOMP QFL36 compound is based on Nylon 6/10 resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.

LNP™ LUBRICOMP™ Compound KP004XXP

Polymer Name:Polyacetal Copolymer (POM)
Processing Methods:Injection Molding
Fillers Included:PTFE/Silicone, PTFE, Silicone, Silicone Oil
Flexural Modulus:2020.0 - 2020.0 MPa

LNP LUBRICOMP KP004XXP compound is based on Acetal (POM) Copolymer resin containing 20% PTFE/silicone. Added features of this grade include: Wear Resistant.

LNP™ LUBRICOMP™ Compound WFP36

Polymer Name:Polybutylene Terephthalate (PBT)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber, PTFE/Silicone, Silicone Oil, PTFE, Silicone
Flexural Modulus:8740.0 - 8740.0 MPa

SABIC's Specialties Business LNP LUBRICOMP WFP36 compound is based on Polybutylene Terephthalate (PBT) resin containing 30% glass fiber, 15% PTFE/silicone. Added features of this grade include: Wear Resistant.

LNP™ LUBRICOMP™ Compound RL004S

Polymer Name:Polyamide 66 (PA 66)
Processing Methods:Injection Molding
Fillers Included:PTFE
Additives Included:Mold Release Agent, Heat Stabilizer, Lubricant (PTFE)

LNP LUBRICOMP RL004S compound is based on Nylon 6/6 resin containing 20% PTFE. Added features of this grade include: Heat Stabilized, Wear Resistant.

LNP™ LUBRICOMP™ Compound EFL36

Polymer Name:Polyether Imide (PEI)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber, PTFE
Additives Included:Lubricant (PTFE)
Flexural Modulus:11300.0 - 11300.0 MPa

LNP LUBRICOMP EFL36 compound is based on Polyetherimide (PEI) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.

LNP™ LUBRICOMP™ Compound IL004

Polymer Name:Polyamide 612 (PA 612)
Processing Methods:Injection Molding
Fillers Included:PTFE
Additives Included:Mold Release Agent, Lubricant (PTFE)
Flexural Modulus:2060.0 - 2060.0 MPa

LNP LUBRICOMP IL004 compound is based on Nylon 6/12 resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

LNP™ LUBRICOMP™ Compound KP002

Polymer Name:Polyacetal Copolymer (POM)
Processing Methods:Injection Molding
Fillers Included:PTFE/Silicone, PTFE, Silicone, Silicone Oil
Flexural Modulus:2060.0 - 2060.0 MPa

LNP LUBRICOMP KP002 compound is based on Acetal (POM) Copolymer resin containing 10% PTFE/silicone. Added features of this grade include: Wear Resistant.

LNP™ LUBRICOMP™ Compound DFL34

Polymer Name:Polycarbonate (PC)
Additives Included:Lubricant (PTFE)
Fillers Included:PTFE, Glass Fiber
Processing Methods:Injection Molding
Flexural Modulus:6000.0 - 6000.0 MPa

LNP LUBRICOMP DFL34 compound is based on Polycarbonate (PC) resin containing 20% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.

LNP™ LUBRICOMP™ Compound EL003

Polymer Name:Polyether Imide (PEI)
Processing Methods:Injection Molding
Fillers Included:PTFE
Additives Included:Lubricant (PTFE)
Flexural Modulus:2890.0 - 2890.0 MPa

LNP LUBRICOMP EL003 compound is based on Polyetherimide (PEI) resin containing 15% PTFE. Added features of this grade include: Wear Resistant.

LNP™ LUBRICOMP™ Compound OL004

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:PTFE
Additives Included:Lubricant (PTFE)
Flexural Modulus:2950.0 - 2950.0 MPa

LNP LUBRICOMP OL004 compound is based on Polyphenylene Sulfide (PPS) - linear resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

ULTEM™ Resin 4211

Polymer Name:Polyether Imide (PEI)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber, PTFE
Additives Included:Flame Retardant

ULTEM™ Resin 4211 is a 20% Glass fiber filled and PTFE filled, standard flow Polyetherimide (Tg 217C). ECO Conforming.

LNP™ LUBRICOMP™ Compound KP004AXZ

Polymer Name:Polyacetal Homopolymer (POM)
Processing Methods:Injection Molding
Fillers Included:Silicone Oil, PTFE/Silicone, PTFE, Silicone
Flexural Modulus:2410.0 - 2410.0 MPa

LNP LUBRICOMP KP004AXZ compound is based on Acetal (POM) Homopolymer resin containing 20% PTFE/silicone. Added features of this grade include: Wear Resistant.

LNP™ LUBRICOMP™ Compound DFL36E

Polymer Name:Polycarbonate (PC)
Additives Included:Mold Release Agent, Lubricant (PTFE)
Fillers Included:PTFE, Glass Fiber
Processing Methods:Injection Molding
Flexural Modulus:8100.0 - 8100.0 MPa

SABIC's Specialties Business LNP LUBRICOMP DFL36E compound is based on Polycarbonate (PC) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Easy Molding, Wear Resistant.

LNP™ STAT-KON™ Compound DEL329XF

Polymer Name:Polycarbonate (PC)
Additives Included:Heat Stabilizer, Flame Retardant
Fillers Included:Carbon Fiber, PTFE
Processing Methods:Injection Molding
Flexural Modulus:6480.0 - 6480.0 MPa

SABIC's Specialties Business LNP™ STAT-KON™ DEL329XF compound is based on Polycarbonate (PC) resin containing 10% carbon fiber, 15% PTFE. Added features of this grade include: Electrically Conductive. Wear Resistant, Flame Retardant.

LNP™ STAT-KON™ Compound DE0049F

Polymer Name:Polycarbonate (PC)
Additives Included:Flame Retardant
Fillers Included:Carbon Fiber, PTFE
Processing Methods:Injection Molding
Flexural Modulus:11650.0 - 11650.0 MPa

SABIC's Specialties Business LNP™ STAT-KON™ DE0049F compound is based on Polycarbonate (PC) resin containing 20% carbon fiber. Added features of this grade include: Electrically Conductive, Flame Retardant, Superior Molding.

LNP™ LUBRICOMP™ Compound QCP36

Polymer Name:Polyamide 610 (PA 610)
Processing Methods:Injection Molding
Fillers Included:Carbon Fiber, PTFE/Silicone, PTFE, Silicone
Additives Included:Mold Release Agent
Flexural Modulus:17000.0 - 17000.0 MPa

SABIC's Specialties Business LNP LUBRICOMP QCP36 compound is based on Nylon 6/10 resin containing 15% PTFE/silicone, 30% carbon fiber. Added features of this grade include: Wear Resistant. Electrically Conductive

LNP™ LUBRICOMP™ Compound DBL32

Polymer Name:Polycarbonate (PC)
Additives Included:Lubricant (PTFE)
Fillers Included:PTFE, Glass Bead, Glass Fiber
Processing Methods:Injection Molding
Flexural Modulus:2400.0 - 2400.0 MPa

SABIC's Specialties Business LNP LUBRICOMP DBL32 compound is based on Polycarbonate (PC) resin containing 10% glass bead and 15% PTFE. Added features of this grade include: Wear Resistant.

VALOX™ FR Resin VC112

Polymer Name:Polybutylene Terephthalate (PBT)
Processing Methods:Injection Molding
Fillers Included:Carbon Fiber, PTFE
Additives Included:Flame Retardant, Impact Modifier, Heat Stabilizer, Metal Deactivator
Flexural Modulus:7350.0 - 7350.0 MPa