LNP THERMOCOMP™ Compound - 2X04505 - SABIC's Specialty

Identification & Functionality

Chemical Family: Fluoropolymers,
Polyolefins
Fillers Included: Carbon Fiber
Polymer Name: Ethylene Tetrafluoroethylene Copolymer (ETFE)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Materials Features: Cost Effective,
Electrically Conductive,
High Stiffness,
High Strength,
Light Weight

Applications & Uses

Markets: Electrical & Electronics,
Industrial
Applications: Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Electrical & Electronics — Devices & Assemblies
Industrial Automation
Electrical & Electronics — Parts & Components
Semiconductor Manufacturing
Industrial — Power, Water & Utilities
Renewable Energy
Plastics & Elastomers End Uses: Electrical/Electronic Applications,
Energy Management,
Industrial Applications,
Semiconductor Applications
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Physical Properties
Mechanical Properties
Thermal Properties
Impact Properties
Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Stress (Yield) ¹¹	89	MPa	ISO 527
Tensile Stress (Break) ¹¹	88	MPa	ISO 527
Tensile Strain (Yield) ¹¹	4.6	%	ISO 527
Tensile Strain (Break) ¹¹	4.9	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	11580	MPa	ISO 527
Flexural Stress ¹¹	319	MPa	ISO 178
Flexural Modulus ¹¹	18800	MPa	ISO 178
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	87	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	85	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	4.5	%	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	4.8	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	15160	MPa	ASTM D638
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	10340	MPa	ASTM D790

	Value	Units	Test Method / Conditions
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	251	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	207	°C	ISO 75/Af
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000126	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000012	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000078	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.0000774	1/°C	ASTM E831
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	255	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	222	°C	ASTM D648

	Value	Units	Test Method / Conditions
Izod Impact (Notched, 80104, at 23°C) ¹¹	23	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	58	kJ/m²	ISO 180/1U
Multi-Axial Impact ¹¹	8	J	ISO 6603
Izod Impact (Notched, at 23°C) ¹¹	272	J/m	ASTM D256
Izod Impact (Unnotched, at 23°C) ¹¹	1030	J/m	ASTM D4812
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹	18	J	ASTM D3763

Packaging & Availability

LNP™ THERMOCOMP™ Compound 2X04505