NORYL PPX™ Resin PPX7110

Identification & Functionality

Additives Included

Heat Stabilizer,

Impact Modifier

Polymer Name

PPE/PP Alloy

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Features & Benefits

Labeling Claims

No Added PFAS

Materials Features

Chemical Resistant,

Dimensional Stability,

Heat Stabilized,

High Hydrolytic Stability,

High Impact Resistance,

High Stiffness,

High Temperature Application,

High Tensile Strength,

Impact Modified,

Low Moisture Absorption,

Low Shrinkage,

Low Specific Gravity,

Low Warpage,

No Added PFAS,

Unreinforced,

Very Good Heat Resistance

Applications & Uses

Markets

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Healthcare & Pharma

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Building Materials

Pipes & Plumbing

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Healthcare & Pharma — Medical

Medical Devices & Assemblies

Plastics & Elastomers End Uses

Appliances,

Commercial Appliance,

Faucet System Components,

Fittings,

Gears,

Home Appliances,

Medical/Healthcare Applications,

Pump Parts,

Water Management

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Flame Rating

UL 94 HB

Physical Properties

	Value	Units	Test Method / Conditions
Density ¹¹	0.97	g/cm³	ISO 1183
Specific Gravity ¹¹	0.97	—	ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.8 - 1.2	%	SABIC method
Melt Flow Rate (at 260°C, 5.0 kgf) ¹¹	10.6	g/10 min	ASTM D1238
Melt Volume Rate (at 280°C, 5.0 kg) ¹¹	12.9	cm³/10 min	ISO 1133
Melt Volume Rate (at 260°C, 5.0 kg) ¹¹	11	cm³/10 min	ISO 1133

Mechanical Properties

	Value	Units	Test Method / Conditions
Taber Abrasion (CS-17, 1 kg) ¹¹	75	mg/1000cy	SABIC method
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	35	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	32	MPa	ASTM D638
Tensile Stress (Yield, 5 mm/min) ¹¹	34	MPa	ISO 527
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	6.5	%	ASTM D638
Tensile Stress (Break, 5 mm/min) ¹¹	30	MPa	ISO 527
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	195	%	ASTM D638
Tensile Strain (Yield, 5 mm/min) ¹¹	6	%	ISO 527
Tensile Modulus (at 50 mm/min) ¹¹	1340	MPa	ASTM D638
Tensile Strain (Break, 5 mm/min) ¹¹	195	%	ISO 527
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	51	MPa	ASTM D790
Tensile Modulus (at 1 mm/min) ¹¹	1500	MPa	ISO 527
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	1550	MPa	ASTM D790
Flexural Stress (Yield, at 2 mm/min) ¹¹	50	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	1700	MPa	ISO 178
Ball Indentation Hardness (H358/30) ¹¹	65	MPa	ISO 2039-1

Thermal Properties

	Value	Units	Test Method / Conditions
Vicat Softening Temperature (Rate B/50) ¹¹	138	°C	ASTM D1525
Vicat Softening Temperature (Rate B/50) ¹¹	95	°C	ISO 306
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	113	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	77	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000081	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000112	1/°C	ASTM E831
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹	0.00009	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹	0.00012	1/°C	ISO 11359-2
Vicat Softening Temperature (Rate B/120) ¹¹	1.00E+02	°C	ISO 306
Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120*10*4, sp=100mm) ¹¹	108	°C	ISO 75/Be
Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120*10*4, sp=100mm) ¹¹	75	°C	ISO 75/Ae

Electrical Properties

	Value	Units	Test Method / Conditions
Volume Resistivity ¹¹	min. 1.E+15	Ω.cm	IEC 60093
Surface Resistivity (ROA) ¹¹	min. 1.E+15	Ω	IEC 60093
Dielectric Strength (in oil, at 3.2mm) ¹¹	22	kV/mm	IEC 60243-1
Relative Permittivity (1 MHz) ¹¹	2.2	—	IEC 60250
Dissipation Factor (at 50/60 Hz) ¹¹	0.0006	—	IEC 60250
Dissipation Factor (at at 1 MHz) ¹¹	0.0006	—	IEC 60250
Comparative Tracking Index ¹¹	600	V	IEC 60112
Relative Permittivity (50/60 Hz) ¹¹	2.2	—	IEC 60250

Processing Information (Sheet Extrusion)

	Value	Units	Test Method / Conditions
Adapter Temperature	265 - 270	°C	—
Barrel - Zone 1 Temperature	145 - 155	°C	—
Barrel - Zone 2 Temperature	255 - 265	°C	—
Barrel - Zone 3 Temperature	270 - 280	°C	—
Barrel - Zone 4 Temperature	270 - 280	°C	—
Die Temperature	265 - 270	°C	—
Drying Temperature	60 - 65	°C	—
Drying Time	2 - 4	Hrs	—
Drying Time (Cumulative)	4	Hrs	—
Melt Temperature	270 - 280	°C	—

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	437	J/m	ASTM D256
Izod Impact (Notched, at -30°C) ¹¹	149	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	37	J	ASTM D3763
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	No break	kJ/m²	ISO 180/1U
Instrumented Dart Impact Total Energy (at -30°C) ¹¹	27	J	ASTM D3763
Izod Impact (Unnotched, 80*10*4, at -30°C) ¹¹	No break	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	25	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*4, at -30°C) ¹¹	9	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	25	kJ/m²	ISO 179/1eA
Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	5	kJ/m²	ISO 179/1eA
Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹	No break	kJ/m²	ISO 179/1eU
Charpy Impact (at -30°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹	38	kJ/m²	ISO 179/1eU

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	60 - 65	°C	—
Drying Time ⁷	2 - 4	Hrs	—
Drying Time (Cumulative) ⁷	8	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	260 - 290	°C	—
Nozzle Temperature ⁷	260 - 290	°C	—
Front - Zone 3 Temperature ⁷	250 - 290	°C	—
Middle - Zone 2 Temperature ⁷	240 - 280	°C	—
Middle - Zone 2 Temperature ⁷	240 - 285	°C	—
Rear - Zone 1 Temperature ⁷	225 - 275	°C	—
Hopper Temperature ⁷	60 - 80	°C	—
Mold Temperature ⁷	30 - 50	°C	—
Mold Temperature ⁷	40 - 60	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed ⁷	20 - 100	rpm	—
Shot to Cylinder Size ⁷	30 - 70	%	—
Vent Depth ⁷	0.038 - 0.051	mm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94HB Flame Class Rating) ᵖ	min. 1	mm	UL 94
Glow Wire Flammability Index (passes at 650°C) ʳ ᵖ	3.2	mm	IEC 60695-2-12

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America