Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Performance
- Good corrosion resistance
- Excellent strength retention at elevated temperatures
- Flame retardancy BS476:Part 7:1997 Class I rating with 5% antimony trioxide
- Flame retardancy ASTM E-84 Class II rating with 5% antimony trioxide
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Applications
- Interior Furniture
- Building Panels
- BS476:Part 7:1997 with 5% Antimony Trioxide
- ASTM E84 with 5% Antimony Trioxide
- ASTM E 162 - 25
- ASTM D 635
Properties
- Flame Rating
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Percent Styrene | 30 - 40 | % | — |
| Viscosity Brookfield, cps spindle 3 at 60 rpm | 450 -550 | cps | — |
| Gel Time, 25 °C | 25 - 30 | min | — |
| Cure time (De-mold time) | 3 | Hrs | — |
| Glass Content by Weight | 32 | % | — |
| Tensile Strength | 12400 | psi | — |
| Tensile Modulus (x 10^5) | 11 | psi | — |
| Tensile Elongation | 1.9 | % | — |
| Flexural Strength | 23200 | psi | — |
| Flexural Modulus (x 10^5) | 9.6 | psi | — |
| Heat Distortion Temperature (Resin) | 80 | °C | — |
| Heat Distortion Temperature (Laminate) | 200 | °C | — |
| Compressive Strength | 22300 | psi | — |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- Dot Label Required
Flammable Liquid
Technical Details & Test Data
- Flame Spread Rating
ASTM E 84 - 69
ASTM E 84 (Plus 5% Antimony Oxide) - 23.08
ASTM E 162 - 45
ASTM E 162 (Plus 5% Antimony Oxide) - 25
BS476:Part 7 - 210
BS476:Part 7 (Plus 5% Antimony Oxide) - 75
Laminates will withstand moderate impact and distortion without fracture. Laminates exposed to direct sunlight will tend to yellow slightly unless stabilized with UV screener; however, they will retain their high strength characteristics indefinitely, and will not be prove to stress crazing or checking. Moderate exposure to moisture and water at ambient temperatures will not affect the performance of the laminate.
Packaging & Availability
- Standard Packaging
220 Kgs Standard Steel Drums
Storage & Handling
- Handling
Siropol 8050 resin contains ingredients, which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.
Saudi Industrial Resins Ltd., maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.
Our MSDS should be read and understood by all of your supervisory personnel and employees before using SIR’s products in your facilities.
- Recommended Storage
DRUMS:- Store at temperatures below 25P P°C. Storage life decreases with increasing storage temperature. Avoid exposure to heat sources, such as direct sunlight or steam pipes. Keep containers sealed to prevent moisture pickup and monomer loss. Rotate stock.
BULK: - Store in stainless steel tanks or tanks lined with epoxy or phenolic coatings. Observe precautions against heat and moisture (see above). An oxygen or dry air spurge may be desirable to keep inhibitors activated. Store at temperature below 25 °C.