Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Applications
- Cure Method
- Suggested Uses
Body Resin
Properties
- Physical Form
- Appearance
- Light Green
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Percent Styrene | max. 44 | % | — |
| Viscosity Brookfield, cps spindle 3 at 60 rpm (23 °C) | 180 - 230 | cps | — |
| Acid Value (Solids) | max. 20 | — | — |
| Specific Gravity | 1.02 | — | — |
| Pounds per Gallon | 9.2 | — | — |
| Flash Point Range | 33 | °C | — |
| Water Absorption (7 day value) | 33 | mg | — |
| Barcol Hardness | 45 | — | ASTM D-2583 |
| Deflection temperature | 82 | °C | ASTM D-648 |
| Flexural Strength | 125 | N/mm2 | ASTM D-790 |
| Tensile Strength | 77 | N/mm2 | ASTM D-638 |
| Elongation at break | min. 3 | % | ASTM D-638 |
| Elongation at maximum stress | min. 3 | % | ASTM D-638 |
Regulatory & Compliance
- Certifications & Compliance
- Dot Label Required
Flammable Liquid
Technical Details & Test Data
- Typical Curing Characteristics
Resin= 100 g (Cup method)
Room temperature cure at 23 ºC
Cobalt 1 % Butanox M60 Temperature ºC Gel Time minutes Peak Exothermic Total Time minutes 2 % 2 % 23 ºC 7 - 12 min 160 - 190 ºC 22 - 24 min
Packaging & Availability
- Standard Packaging
220 Kgs Standard Steel Drums
Storage & Handling
- Handling
SIROPOL DE33C resin contains ingredients, which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.
Saudi Industrial Resins Ltd., maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.
Our MSDS should be read and understood by all of your supervisory personnel and employees before using SIR’s products in your facilities.
- Recommended Storage
DRUMS: Store at temperatures below 25 o C. Storage life decreases with increasing storage temperature. Avoid exposure to heat sources, such as direct sunlight or steam pipes. Keep containers sealed to prevent moisture pickup and monomer loss. Rotate stock.
BULK: Store in stainless steel tanks or tanks lined with epoxy or phenolic coatings. Observe precautions against heat and moisture (see above). An oxygen or dry air spurge may be desirable to keep inhibitors activated. Store at temperature below 25 ºC.