Products

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinyl ester resin developed for use as a infusion resin with a wide range of gel times with various catalysts. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crestafix® 621CC 65 Bonding Paste is a pre-accelerated urethane acrylate/isophthalic polyester high-performance bonding paste. It is a non-sagging, filled compound specifically designed for the assembly and bonding of GRP moldings. It offers excellent adhesion and good elongation at break and requires a visual check for an effective catalyst mix.

Crestafix® 621CC White 20 Bonding Paste is a pre-accelerated urethane acrylate/isophthalic polyester high-performance bonding paste. It is a non-sagging, filled compound specifically designed for the assembly and bonding of GRP moldings. It exhibits no drainage on vertical surfaces, is highly thixotropic, and provides excellent adhesion and good elongation at break.

Crestafix® 621CC 10 Bonding Paste is a pre-accelerated urethane acrylate/isophthalic polyester high-performance bonding paste. It is a non-sagging, filled compound specifically designed for the assembly and bonding of GRP moldings. It is highly thixotropic and offers excellent adhesion and good elongation at break.

Crestafix® 621CC 30 Bonding Paste is a pre-accelerated urethane acrylate/isophthalic polyester high-performance bonding paste. It is a non-sagging, filled compound specifically designed for the assembly and bonding of GRP moldings. It has excellent adhesion and good elongation at break, with no print through and an excellent surface aspect.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Resin S15.6 is a very flexible unsaturated polyester resin based on adipic acid. It can be used alone or in conjunction with other polyester resins for the manufacturing of flexible products. Impregnating resins particularly isophtalic resins can be flexibilised by addition of Crystic® Resin S15.6 without any significant impact on the chemical resistance properties.