Products

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinyl ester resin developed for use as a infusion resin with a wide range of gel times with various catalysts. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Brush Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. It has been developed to have exceptional water and chemical resistance and is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd'™s Register of Shipping.

Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Polyester Resin 474PA is a pre-accelerated, thixotropic version of Crystic 198. Crystic 474PA is an exceptionally versatile resin suitable for the fabrication of laminates for a wide variety of applications throughout the chemical industry, particularly in environments where resistance to heat and chemicals is required.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Crystic® Resin S15.6 is a very flexible unsaturated polyester resin based on adipic acid. It can be used alone or in conjunction with other polyester resins for the manufacturing of flexible products. Impregnating resins particularly isophtalic resins can be flexibilised by addition of Crystic® Resin S15.6 without any significant impact on the chemical resistance properties.

Crystic® Polyester Resin 198 is a medium-viscosity orthophthalic polyester resin with good heat and chemical resistance properties. This product was developed for use in the chemical industry (tanks, pipes, fume stacks, etc.), where heat and chemical resistance are both required, but it can also be used in industrial, transportation, and building and construction applications. It can be used with glass fiber-backed polypropylene and suitably treated uPVC. This product has a high HDT of 112°C and a 12-minute gel time.