Products

Texicryl® 13-602 is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks, sealant applications and architectural coatings. It enhances the workability and technical performance of many products. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Crestakyd® 10-1066 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Texicryl® 13-318 is a hydrophobically modified alkali swellable emulsion designed for use as a rheology modifier in waterbased formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. This emulsion can be used in cartidge products and construction adhesives.

Crestakyd® 30-5005 is short oil fast drying alkyd resin with high hardness. It is an essential paint and coating component, offering excellent durability, good flow and leveling properties. This short oil air drying alkyd is used in air drying primers and finishes, metal and wood application.

Crystic® Gelcoat LS 97PA Isopthalic Spray is our best weathering isophthalic spray gelcoat. It exhibits low color change and superior gloss retention when compared to all other isophthalic competitive gel coats tested. This product can be used across all markets, and it has excellent water resistance and Lloyd's approval for the marine market.

Texicryl® 13-308 is an alkali soluble emulsion designed as a thickener for water-based formulations. It can be used in the formulation of ceramic tile adhesives, paints, waterborne coating systems and for use in EN 12004-1and2: 2017 D1 CTAs, a wide range of building adhesives and highly filled coatings.

Texicryl® 13-601 is a pure acrylic copolymer emulsion designed for use in both interior and exterior coating applications. It is designed for use in the formulation of solvent free decorative coatings with excellent durability and low dirt pick up. Other applications include artist’s colors and hobby paints.

Texicryl® 13-313 is an alkali swellable thickener designed for water-based formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. It has been designed for use in the formulation of textured coatings, woodstains, paints and waterborne coating systems.

Crystic® Isophthalic Brush Gelcoat GT-600 is our gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Texicryl® 13-074 is an APEO free styrene acrylic copolymer emulsion which has been developed for use in mixes containing portland cement for flooring applications. It imparts a higher degree of flexibility and also acts as a soft binder used in fabric glue formulations for tissues and papers.

Texicryl® 13-687 is a high performance water based, adhesion promoted pure acrylic emulsion, which has been specifically developed for use in high performance coatings for interior and exterior applications. This polymer is in line with “green technology” as it is APEO free, max. 0.1% VOC and has a low odor emulsion.

Crystic® Fireguard Gelcoat 70PA is our market leading halogen-free fire retardant gelcoat. It has been specifically designed for very stringent fire approvals particularly requiring low smoke characteristics. It achieves TS45545 HL2 with Crestapol 1212 and has low surface spread of flame. It can also be used with standard polyester fire retardant resins.

Crystic® Orthophthalic Topcoat 402PA is a pre-accelerated topcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product has been formulated for brush application.

Crystic® Isophthalic Brush Topcoat 65PAX is a general purpose, brush isophthalic topcoat which cures tack free when applied to the reverse side of a laminate. It can be used in applications where the back surface of a polyester laminate needs to be given a gelcoat finish to improve aesthetics.

Texicryl® TD8449 is a styrene acrylic binder which exhibits excellent stain blocking properties and gives good results for lipstick, highlighter pen and general marker pen stains. It has shown promising results in a simple formulation for the following: Tannin stain blocking Marker stain blocking

Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in airdry and force-dry primers and topcoats. It is recommended for use in air-dry and force-dry primers and topcoats in a variety of general industrial metal coating applications.

Texicryl® 13-073 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives. This emulsion is especially suitable for floor tile adhesives and also used in the formulation of primer systems. It controls the porosity and aids adhesion to the base substrates.

Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for metal paints, wood coatings, road marking paints, masonry paints and concrete.

Texicryl® 13-070 is a styrene acrylic copolymer emulsion designed primarily as a binder for D1 ceramic tile adhesives. It has been designed to be formulated, with a wide range of filler types, into D1 tile adhesives. It acts as a binder for use in EN 12004-1and2: 2017 D1 CTAs, economic exterior and interior coatings, fence stains and flat paints.

Crestacryl® 71-8026 is a thermoplastic acrylic resin with very rapid solvent release and drive-over ability. This resin possesses good quality properties such as excellent hardness, very good elasticity and adhesion. It can be used as a high grade road-marking paint with excellent solvent release.

Texicryl® 13-013 is a styrene acrylic copolymer emulsion containing a plasticizer. The product gives excellent adhesion on substrates and even at low temperature, the flexibility is good. It is suitable for paints, sealants, acrylics, highly filled putties and soft fillers applications.

Crestakyd® 10-1022 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Texicryl® 17-0330 is a styrene acrylic copolymer emulsion designed for use in high performance adhesives, inks, and coatings where flexibility and/or cold temperature flexibility are desired. It can be utilized in a range of water based adhesives and emulsion paint formulations and can easily be formulated into coatings varying in properties from semi-gloss finish to high pigment volume concentration low-cost paints.

Crystic® Low Styrene Gelcoat 76PA FR is a low styrene content, pre-accelerated, fire retardant gelcoat developed to have very low surface spread of flame. It has been formulated for brush application and can be used for building applications, vehicle bodies and general industrial work.

Crystic® Low Styrene Spray Gelcoat LS 96PA is an isophthalic gelcoat. It is filled, pre-accelerated and formulated for spray application. The viscosity profile ensures even coverage with minimal drainage and low film porosity. It is recommended for use in building and transport industries and is also suitable for general molding requirements.

Crystic® Laminating Resin 471PALV is a pre-accelerated, low-viscosity polyester resin with rapid hardening characteristics. This laminating resin combines rapid impregnation of reinforcements and fillers with a very short mold release time and is suitable for hand-laying or spray applications. It has an 8-minute gel time, Lloyds approval, and is suitable for use in marine, transportation, building and construction, and industrial applications.

Texicryl® 13-620 is an APEO free pure acrylic copolymer emulsion designed for use in the building and construction industry. The polymer offers improved adhesion to various substrates and superior elasticity to relevant mixtures. It is designed for use in flexible mineral sealings, crack-bridging systems, waterproof coatings, fillers, putties, polymer-modified cement and mortar based mixtures of all kinds.

Texicryl® 13-682 is the APEO free Styrene Acrylic copolymer emulsion designed for use in high performance roof coating compounds and in a wide range of water-based paints. It is specifically recommended for the formulation of roof mastics and waterproofing compounds. It has exceptional water resistance after drying yet good water vapour transmission. Compounds made with Texicryl® 13-682 stand up to prolonged ponded water conditions.

Texicryl® 13-616 is a self crosslinking acrylic copolymer emulsion designed for use in high performance coatings. It is designed for use in high performance coatings with superior water, chemical and blocking resistance. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Texicryl® 13-645 is a high effiency styrene acrylic binder which exhibits excellent resistance to water blanch. It is a general purpose styrene acrylic binder which exhibits excellent resistance to water blanch. Texicryl® 13-645 has a low surfactant content which helps to minimise rheology modifier use in a compounded system.

Crystic® Brush Topcoat 506PA White is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin and has been formulated for application by roller or brush. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Spray Gelcoat LS 30PA is a superior weathering Iso-NPG gelcoat. It is pre-accelerated and formulated for spray application. Crystic® Gelcoat LS 30PA has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity.

Crystic® Spray Gelcoat 976SMK is a chemical resistant, thixotropic and pre-accelerated Iso - NPG gelcoat, designed for the manufacture of swimming pools. It will provide high chemical and hydrolysis resistance. This gelcoat is to be applied by spray with airless machine.

Crystic® Fireguard Gelcoat 72PAX is a new technology, spray fire retardant topcoat which is halogen free. It has low surface spread of flame compared to competitive standard technology fire retardant topcoats. This pre-accelerated filled spray topcoat can be used both internally and externally for building, transport and general industrial work.

Crystic® Brush Topcoat 507PA is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin and has been formulated for application by brush. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Fireguard Gelcoat 72PA is a new technology spray fire retardant gelcoat which is halogen free. It has a number of fire approvals with different Crystic resin systems. This product has low surface spread of flame compared to competitive standard technology fire retardant gelcoats.