Products

Crestafix® B72R Bonding Paste is a polyester-based, MEKP catalysed core bedding compound, developed for both hand-layup and vacuum-bag core installation. It is used as a 2-part system in conjunction with a priming resin applied to the core surface. Lightweight and non-sagging, Crestafix® B72R is formulated to the degree of elasticity required for the core to skin interface.

Crestafix® 621CC 45 Bonding Paste is a pre-accelerated urethane acrylate/ isophthalic polyester high performance bonding paste. It is a non-sagging, filled compound, specifically designed for the assembly and bonding of GRP moldings. This highly thixotropic polyester can also be used on timber and plasterboard.

Crestafix® 90-78PA Polyester Bonding Paste is a fast-curing, pre-accelerated, orthophthalic polyester bonding paste. It exhibits exceptional handling properties, especially on GRP and wood substrates. This product has been specifically designed for the assembly and bonding of GRP moldings such as panels, inserts, internal frames, ribs, and any other non-structural bonding applications. It is non-sagging and does not require resin additions.

Crestafix® F26R Polyester Compound is a water-resistant, low-density, polyester-based fairing compound. This product has good adhesion to cured fiber-reinforced polyester and vinyl ester laminates. It sands easily and gives a hard finish after a full cure, yet is not brittle and has good impact strength.

Crestafix® 630PA is a pre-accelerated vinyl ester-based high-performance bonding paste. This product is a non-sagging, filled compound with high strength, specifically designed for the assembly and bonding of GRP moldings. Its applications include panels, inserts, internal frames, ribs, internal core materials, and composite constructions. This product provides high shear strength bonded joints without the need for mechanical fixings.

Crestafix® 90-82PA Polyester Bonding Paste is a pre-accelerated polyester bonding paste. This product is a viscous, white, filled compound that is specifically designed for the assembly and bonding of GRP moldings. Its applications include panels, inserts, internal frames, ribs, composite constructions, and car body components. This product is a high productivity grade designed for use with narrow mixers that will dispense at a high flow rate while maintaining thixotropic properties upon vertical application.

Crestafix® 621CC 85 Bonding Paste is a pre-accelerated urethane acrylate/ isophthalic polyester high performance bonding paste. It is a non-sagging, filled compound, specifically designed for the assembly and bonding of GRP moldings. This highliy thixotropic polyester can also be used on timber and plasterboard.

Crestafix® B39 Adhesive is a high strength pumpable polyester adhesive formulated for production environment in boatbuilding and general fiberglass fabrication. It was formulated to provide reliable structural bonds in both thin and thick bondlines (1/8” to 1”, 3 - 25mm). The product has low shrinkage, low exotherm and no volume loss during pumping.

Crestafix® 90-84PA Polyester Bonding Paste is a lightweight, low-exotherm, pre-accelerated orthophthalic polyester bonding paste. It is a non-sagging compound, designed for non-structural applications where gap-filling may be a secondary requirement. This product has been specifically designed to provide weight-saving properties and ease of application.

Crestafix® 90-80PA Polyester Bonding Paste is a pre-accelerated, orthophthalic polyester bonding paste that is reinforced with 3 mm glass fibers. This product exhibits exceptional mechanical and handling properties, has low shrinkage, and has better resistance to impact. It has been specifically designed for the assembly and bonding of GRP moldings such as panels, inserts, internal frames, ribs, composite constructions, and car body components. It is non-sagging and does not require resin additions.