Products

ADERPRIM MULTI'SPRAY is a Multi-support insulating & anti-rust adhesion primer in aerosol based on alkyd resins in solvent phase. Which has Great versatility of use, Isolates tasks and blocks their migration to subsequent layers, Anti-rust primer, Good adhesion on difficult substrates, Type of propellant gas: butane / propane.

SCSO Unikalo Nae Impress is a opacifying impression based on vegetable resin and renewable components in aqueous phase.

AQUAPRIM INSULATION is a Insulating primer and primer based on synthetic resin in aqueous phase. Which is Isolates stains and halos of nicotine, soot, ink and glue, Blocks wood tannins, Isolates graffiti, Good adhesion on any closed background. Does not tint and must not be mixed with other products. Do not dilute on a stained or tanned background. Indoors and outdoors on concrete, cement and hydraulic coatings, glass, earthenware, sanded melamine, aluminum, stripped galvanized steel, stripped zinc, electrogalvanized, stainless steel, bare or coated with old adherent paints and varnishes in good condition. On plasterboard with cardboard skins, copper, wood and derivatives, exclusively indoors.

ADERPRIM MICRO Solvent-borne urethane alkyd resin universal primer and anti-rust primer. Which is Opacifying, Microporous, Rust protection, Quick drying and covering with all one-component acrylic, alkyd paints in solution or emulsion Fine grain, covered with stretched lacquer finishes. Which is available in the color of the finish, it significantly improves the opacity of the finish system (bright shades). If the hanging function is required, prefer ADERPRIM MICRO in white or pastel shades.

AQUAPRIM MICRO is a Opacifying universal primer available in the finishing color and water-based acrylic resin primer. Which is a Unsaponifiable, Microporous, Recoverable during the day, High build and opacity, Certified Excell Green Zone. Outdoors and indoors on concrete, cement plaster, wood and non-tannic derivatives, glass, porcelain stoneware, polycarbonate, aluminum, weathered galvanized steel, weathered zinc, electrogalvanized, PVC, bare or coated with old paint members in good condition. Indoors exclusively, on paint coating, plasterboard with cardboard skin and copper. The supports must comply with the DTU concerning them and in particular with NF DTU 59.1. Prior recognition necessary in order to determine the most suitable preparation for their condition and nature (cleaning, washing/rinsing, sanding, scraping, degreasing, roughening, dusting, etc.).

AQUARYL PRIMO is a pigmented print based on acrylic resin in aqueous phase.

Prime + is a Universal primer based on urethane alkyd resin in solvent phase. which is High opacity, Microporous,Fast hardening Fixes, isolates and regulates the porosity of the supports. Indoors on usual building substrates such as cement, concrete, hydraulic coatings pH<9, plasterboard with cardboard skins coated with paints, plaster tiles, wood and derivatives, bare or coated with old adherent paints in good condition. Interior: Ambient and support temperature between 8° and 35°C - Hygrometry < 70% RH. Do not apply on condensing substrates. Humidity rate of woodwork < 10-12% depending on the nature. The supports must comply with the DTU concerning them and in particular with NF DTU 59.1. Prior recognition necessary to determine the most suitable preparation for their condition and nature (cleaning, washing/rinsing, sanding, scraping, degreasing, roughening, dusting, etc.).

AQUARYL IMPRESS+ is a Opacifying impression based on acrylic resin in aqueous phase. Which is good filling power, good glide, VOC< 1g/L. Indoors on usual building substrates such as plasterboard with cardboard skin, paint coatings, cement and hydraulic coatings, normally absorbent, bare or coated with old adherent paints in good condition. Interior: Temperature between 8° and 35°C - Hygrometry < 70% RH. Do not apply on condensing substrates. Masonry moisture content < 5%. The supports must comply with the DTU concerning them and in particular with NF DTU 59.1. Prior recognition necessary to determine the most suitable preparation for their condition and nature (cleaning, washing/rinsing, sanding, scraping, degreasing, roughening, dusting, etc.). In general, after preparation, the substrates must be healthy, cohesive, clean and dry to receive a coat of AQUARYL IMPRESS+.

AQUARYL UNDERCOAT is a special impression for droplet based on acrylic resin in aqueous phase. Which is a good opacifying power and special printing before projection of droplet coating.

AQUALINE EVO IMPRESS is a opacifying primer based on alkyd and acrylic resins in aqueous phase. Which is a great comfort of application, Semi-stretched fine grain, good opacifying power, regulates absorption of funds.