Products

Styrene butadiene synthetic rubber SBR-1500 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps.

Synthetic rubber SBR-1502 is styrene (23.5%) and butadiene (76.5%) copolymer obtained by cold emulsion polymerization using the soaps of resin and fatty

NBR 1855 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene and filled with TDAE oil

Synthetic styrene-butadiene rubber is obtained by low-temperature emulsion copolymerisation of butadiene with styrene and filled with petroleum-based softeners.

NBR 4045 is essentially an acrylonitrile (36-40%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. High content of acrylonitrile, very high oil resistance.

Synthetic polybutadiene rubber Synthetic cis-butadiene rubber BR-1203 Ti is the polymerization product of butadiene in solution; in the presence of titanium catalyst; 1,4-cis – at least 90%. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Synthetic cis-butadiene rubber SIBUR BR-1245 is a product of polymerization of butadiene in solution in the presence of neodymium catalyst; 1,4-cis — at least 97%; polydispersity — no more 2.5. The polymer is stabilized by non- staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Synthetic acrylonitrile-butadiene rubber (content acrylonitrile 27-30 %) filled with polyvinylchloride (PVC) is obtained by joint coagulation of butadiene-acrylonitrile latex with polyvinylchloride latex.

Synthetic rubber SIBUR BR-1500 is styrene (23.5%) and butadiene (76.5%) copolymer obtained by cold emulsion polymerization using the soaps of resin and fatty acids. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines and substances that may become a source of nitrosamines.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Styrene butadiene synthetic rubber SBR-1500 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps; non-staining antioxidant

Styrene butadiene synthetic rubber SBR-1502 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps; non-staining antioxidant

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene and filled with TDAE oil

Synthetic cis-butadiene rubber SIBUR BR-1203 Ti is the polymerization product of butadiene in solution; in the presence of titanium catalyst; 1,4-cis – at least 90%. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Styrene butadiene synthetic rubber SBR-1500 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps.

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene and filled with high aromatic oil

Synthetic polybutadiene rubber Synthetic cis-butadiene rubber BR-1203 Ti is the polymerization product of butadiene in solution; in the presence of titanium catalyst; 1,4-cis – at least 90%. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Synthetic cis-butadiene rubber SIBUR BR-1243 Nd Grade B (LP) is a product of polymerization of butadiene in solution in the presence of neodymium catalyst; 1,4-cis — at least 97%; polydispersity — no more 2.85. The polymer is stabilized by non- staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Styrene butadiene synthetic rubber SBR-1502 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps.

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene; filled with TDAE oil and stabilized with staining antioxidant

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene and filled with high aromatic oil

Synthetic rubber SBR-1502 is styrene (23.5%) and butadiene (76.5%) copolymer obtained by cold emulsion polymerization using the soaps of resin and fatty

Oil-filled styrene-butadiene synthetic rubber SBR-1783 SRAE is styrene [23.5%] and butadiene [76.5%] copolymer isobtained Ьу cold emulsion polymerization using the soaps of resin and fatty acids. The copolymer is stabllized with antioxidant of amine type and filled with oil SRAE [CAS #64741-88-4] with PAHs controlled content.

Styrene butadiene synthetic rubber SBR-1500 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps.

Plasticizer DOTP is an ester of 2-ethylhexanol and terephthalic acid, which is used as a commercial plasticizer with high dielectric properties, high cold resistance, reduced volatility.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Synthetic polybutadiene rubber Synthetic cis-butadiene rubber BR-1203 Ti is the polymerization product of butadiene in solution; in the presence of titanium catalyst; 1,4-cis – at least 90%. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Synthetic rubber SBR-1502 is styrene (23.5%) and butadiene (76.5%) copolymer obtained by cold emulsion polymerization using the soaps of resin and fatty

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene; filled with high aromatic petroleum oil and stabilized with staining antioxidant

Synthetic cis-butadiene rubber BR-1243 Nd HV is a product of polymerization of butadiene in solution in the presence of rare-earth metal-base catalysts with addition of an antioxidant, which contains at least 97% of 1,4-cisbonds. The polymer contains no nitrosamines or substances that may be a source of nitrosamines.

Synthetic cis-butadiene functionalized rubber SIBUR BR-1243 E-Pro is the polymerization product of butadiene in solution in the presence of neodymium catalyst; 1,4-cis at least 97%; polydispersity not more 2.6. The polymer is stabilized by non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines. The product is characterized by improved processability.

Butadiene-styrene synthetic statistical rubber SSBR-2560 TDAE HV is a polymerization product of 1,3-butdiene with styrene in hydrocarbon solvent in the pres-ence of anionic initiating agent. Polymer is TDAE oil extended and stabilized with staining antioxidant. The polymer contains no nitrosamines and substances that may become a source of nitrosamines.

NBR 2675 is essentially an acrylonitrile (27-30%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Medium content of acrylonitrile, heightened oil resistance.

Synthetic acrylonitrile-butadiene rubber (content acrylonitrile 27-30 %) filled with polyvinylchloride (PVC) is obtained by joint coagulation of butadiene-acrylonitrile latex with polyvinylchloride latex.