Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features and Benefits
- Highest oil and fuel
- Abrasion
- Heat resistance
- Operating temperature range: -10 °С to +120 °C
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Applications
- Oil and fuel hoses
- Gaskets
- Seals
- Reinforced hose for transfer oil
- Petroleum products
Properties
- Appearance
- Bales from light-yellow to pink or light-beige color
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Acrylonitrile Content | 36 - 40 | wt% | Method of supplier |
Ash Content | max. 0.5 | wt% | ASTM D 5667 |
Elogation at Break | min. 450 | % | — |
Modulus (at 300%) | min. 11.8 | MPa | — |
Mooney Viscosity (MML1+4, 100°C) | 42 - 48 | — | — |
Tensile Strength | min. 23.5 | MPa | ASTM D 3187, ASTM D 412 |
Tensile Stress at 300 % Elongation | min. 11.8 | MPa | ASTM D 3187, ASTM D 412 |
Ultimate Elongation | min. 450 | % | ASTM D 3187, ASTM D 412 |
Volatile Matter Content | max. 0.8 | wt% | ASTM D 5668 |
Value | Units | Test Method / Conditions | |
Maximum Torque | 13.6 - 18.4 | dNm | ASTM D 5289 |
Minimum Torque | 0.8 - 1.8 | dNm | ASTM D 5289 |
Scorch Time (Ts´1) | 1.6 - 3.8 | Minutes | ASTM D 5289 |
Time to 50% of full cure (t'50) | 4.1 - 7.5 | minutes | ASTM D 5289 |
Time to 90% of full cure (t'90) | min. 15.2 - 22.8 | minutes | ASTM D 5289 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging Information
- Plywood 1,26 mt or plastic container 0,54 MT
Storage & Handling
- Shelf Life
- 18 Months
- Storage & Handling
- Storage Condition : at the temperature not higher than 30°C, in place protected from direct sunlight and atmospheric precipitation.