Products

Biresin® CR122 is a medium viscosity epoxy resin system suitable for the production of high performance fiber reinforced composites with a thermal performance up to 120°C.

Sika RSF 816 G can be combined with natural fibers and fabrics such as flax, hemp or cellulose based materials fo greener composite solutions.

Biresin® CR80 is a low viscosity epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 80°C.

EPOLAM 2020 is a Variable reactivity by addition of an accelerator Tg ~80°C

Biresin® CR134 FR is a fi lled epoxy resin system suitable for the production of fi re resistant high performance fi bre reinforced composites with thermal properties up to 130°C. When used with carbon fi bre reinforcement Biresin® CR134 FR allows the fabric structure to be seen.

EPOLAM 8064 is a Low viscosity amine-cured laminating epoxy system showing excellent flexibility and high reactivity.

Biresin® CR132 FR is a fi lled epoxy resin system suitable for the production of fi re resistant high performance fiber reinforced composites with thermal properties up to 150°C.

Biresin® CR82 is an epoxy resin system designed for the hand lay-up, vacuum bagging and filament-winding processes, especially for applications where curing temperatures of ≥ 75 °C cannot be implemented.

Good properties of impregnation and bonding of wood. Germanischer Lloyd approved for EPOLAM 2017 and 2018 hardeners Tg ~80°C.

Epolam 2080 is MDA free. Production of composite structures by the usual impregnation methods (contact, under vacuum...).Used in concrete by addition of aluminum fillers or other ones.

Biresin® CR132 is an epoxy resin system suitable for the production of high performance fiber reinforced composite parts and molds with thermal properties up to 130°C

EPOLAM 2500 meets the requirements of AIRBUS HELICOPTERS specifications ECS 2196 Rev.B for interior fittings manufacture and repair.

Biresin® CR172 is an epoxy resin system designed for the hand lay-up process and injection processes and is especially for applications when a very high thermal resistance is needed.

The Biresin® CR84 system is a lightly thickened epoxy resin system having a pot-life up-to 10 hours and a reduced tendency to drip or spray from reinforcing fibers during processing. The resin system can be fully cured at 80°C.

EPOLAM 2022 is a Variable reactivity by addition of an accelerator Tg ~80°C

Epolam 2092 is MDA free. Production of composite tooling and structures by the usual impregnation methods (infusion, wet-lay-up).