Products

Silicones Gl-1000 is an extremely high tear strength, tin-catalyzed RTV-2 silicone rubber, which was designed for casting polyester parts. GI-1000 is not sensitive to inhibition, meaning it will cure at room temperature over virtually any surface.

Silicones GI-765 is a thixotropic (resistant to flow) tin catalyzed silicone designed to be used when painting or spraying onto vertical surfaces.

Silicones P-429 is an extremely soft, tacky, transparent, resilient silicone rubber gel. It is a two component, addition cure material that is sensitive to cure inhibition when in contact with sulfur, nitrogen or organo-tin containing materials.

Silicones P-656 platinum catalyzed, translucent silicones designed to be used in special effects or in glove molding. The same base, P-656 B, can be used in conjunction with different catalysts to achieve different hardness. Also, you can introduce additives to decrease hardness and/or create tactile adhesion.

Silicones P-125 is a translucent, high tear strength, platinum-catalyzed, RTV-2 silicone rubber, which was designed for casting parts where visual inspection is required. It is easy to mix and de-air, and will cure with virtually no shrinkage. The speed at which the rubber hardens can be dramatically accelerated with heat or with Pt Accelerator at room temperature. Addition-cure two-component silicone rubbers exhibit excellent chemical and heat resistance, but may show some inhibition sensitivity.

Silicones P-157 is a low viscosity, transparent silicone rubber used for potting or encapsulation of intricate parts where visual inspection is required. P-4 offers electrical stability, radiation resistance and will resist reversion when heated in confined spaces. Although it has high tensile strength, it can be easily cut and removed for part repair and then re-poured.

Silicones P-100 is a low viscosity, medium tear strength, platinum-catalyzed, RTV-2 silicone rubber, which was designed to have outstanding heat and chemical resistance. It is easy to mix and de-air, and will cure with virtually no shrinkage. The speed at which the rubber hardens can be dramatically accelerated with heat or with Pt Accelerator at room temperature.

Silicones GI-1210 is a high tear strength, tin-catalyzed RTV-2 silicone rubber, which was designed for casting polyester parts. GI-1210 offers the same advantages as GI-1110 at a slightly lower viscosity. GI-1210 is especially good for molds with deep undercuts and for molds that require flexing for part removal.

Silicones GI-1040 is a high tear strength, tin-catalyzed RTV-2 silicone rubber, which was designed for casting polyurethane foam parts. GI-1040 has a Shore A Hardness of 40, giving it the ability to resist distortion due to the expansion of the foam.

Silicones P-614 is a fast curing, two-component addition cure silicone rubber mold making material that has a minimum working time of 40 minutes, yet can be demolded in only 3 to 4 hours. This allows the mold maker to produce both sides of a two part mold in one 8 hour shift. Parts can also be produced in the same day from a one piece mold.

Silicones P-FDA is designed for mold making where FDA approval for food contact is desired or required. It is approved for repeated food contact, such as making candy or ice sculptures, but is not approved for medicinal purposes or for use inside the human body. P-FDA is a platinum-catalyzed, addition reaction, flexible silicone with excellent tear resistance and tensile strength.

Silicones P-592 is a translucent, addition cure silicone designed to be used to make molds where visual inspection is required. The combination of physical integrity and high hardness make it an excellent choice for prototyping.

Silicones Gl-1220 is a high tear strength, tin-catalyzed RTV-2 silicone rubber, which was designed for casting polyester parts. GI-1220 offers the same advantages of GI-1120 at a lower viscosity. GI-1220 is especially good for molds with deep undercuts and for molds that require flexing for part removal.

Silicones GI-650 is a high tear strength, tin-catalyzed RTV-2 silicone rubber, which was designed for casting polyester parts.

Silicones P-268 is a two component addition cure silicone rubber mold making material. It has a high durometer, high modulus, superb physical properties, minimal shrinkage and extreme chemical resistance making it an excellent choice for prototyping, casting urethane foam and other plastics.

Silicones GI-1120 is a high tear strength, tin-catalyzed RTV-2 silicone rubber, which was designed for casting polyester parts. GI-1120 is especially good for molds with deep undercuts and for molds that require flexing for part removal.

Silicones GI-739 is a thixotropic (resistant to flow) tin catalyzed silicone designed to be used when painting or spraying onto vertical surfaces.

Silicones Gl-1032 is a high tear strength, tin-catalyzed RTV-2 silicone rubber, which was designed for making case molds for the china and ceramics industries. GI-1032 is also excellent for casting polyurethane foam parts when a slightly higher hardness is desired.