Silikal America

About Us

Why Enhanced MMA resins? According to the Georgia Aquarium, acrylic is 17 times stronger than glass. It is not glass holding back the millions of gallons of water at the Georgia Aquarium, it is the same ingredient that makes up the reactive resin component of Silikal flooring systems. Silikal is a renewable floor designed to last the lifetime of the structure. Interested in LEED's credits? You may qualify. Silikal is unlike other floor used for commercial or industrial locations. These inferior products will allow penetration of bacteria, dirt and water to name a few everyday flooring threats because of their porous nature. This in turn creates a cleaning and longevity nightmare. Silikal on the other hand will give you a totally seamless floor surface that is completely pinhole and porous free in addition to being an extremely strong industrial floor!

Browse Products by Market

View All Products

Building & Construction

8 products

Paints & Coatings

8 products

Printing & Packaging

1 product

Browse Products by Technology

View All Products

CASE Ingredients

8 products

Most Viewed Products

View All Products

Silikal® RU 727 resin

Chemical Family:Methacrylates
End Uses:Primer
Compatible Substrates & Surfaces:Concrete, Asphalt
Features:Good Leveling, Multi-Substrate Adhesion, Low Viscosity

SILIKAL® RU 727 resin is a low-viscosity, transparent, solvent-free 3-component methacrylic resin with enhanced substrate adhesion.

Silikal® R 62 resin

Chemical Family:Methacrylates
End Uses:Top Coat
Compatible Substrates & Surfaces:Ceramic, Concrete
Features:Slip Resistance, Good Leveling

SILIKAL® R 62 resin is a medium-viscosity methacrylic resin that is outstandingly suitable for self-leveling coatings of 1 – 4 mm, predominantly indoors or as a top coat for elastic floorings outdoors. Coatings with SILIKAL® R 62 resin can bridge cracks to a certain degree. Visually appealing surfaces and systems can be developed when used in conjunction with a variety of fillers, pigments or decorative materials.

Silikal® RV 368 resin

Chemical Family:Methacrylates
Compatible Substrates & Surfaces:Metal, Steel, Concrete, Asphalt
Features:Excellent Crack Bridging, Good Leveling, Good Elasticity, High Impact Resistance, Low Temperature Flexibility

SILIKAL® RV 368 resin is a solvent-free, 2-component methacrylic resin of high impact resistance and low-temperature fl exibility whose highly-molecular structure makes it outstandingly suitable for self-leveling coatings subject to extreme stresses, predominantly outdoors or for cold stores. Coatings made from SILIKAL® RV 368 resin are durably elastic and able to crack bridging.

Silikal® R 61 resin

Chemical Family:Methacrylates
Compatible Substrates & Surfaces:Concrete
Features:Good Leveling, Slip Resistance

SILIKAL® R 61 resin is a reactive, slightly elasticized resin for slip-resistant floorings in wet areas. SILIKAL® R 61 resin is a solvent-free, medium-viscosity 2-component methacrylic resin of a slightly elasticized character. It is employed as a binder in the manufacture of self-leveling coatings sprinkled with quartz sand or for smoothable floorings with colored quartz, predominantly in the food industry (wet areas), in coat thickness of 2 - 3 mm or 4 - 6 mm. Hot water stress is limited to 60 °C. This limit may be briefly exceeded to 80 °C for cleaning purposes, but only if the floor is not completely warmed through.

Silikal® R 81 resin

Chemical Family:Methacrylates
End Uses:Top Coat
Features:Water Resistance, Low Viscosity, High Capacity of Penetration, Yellowing Resistance

SILIKAL® R 81 resin is a reactive, solvent-free, low-viscosity, virtually non-yellowing 2-component methacrylic resin offering good resistance to water interaction. It serves primarily as a slightly elasticized and colorless top coat on sprinkled coatings in wet areas. The low viscosity enhances the penetrative capacity of the resin in sand-coated surfaces. Hot water stress is limited to +60 °C. The temperature stress may be increased to +80 °C for short periods, e. g. to allow cleaning, provided that the coating is not thoroughly warmed through to the substrate.

Silikal® R 71 / R 71 re resin

Chemical Family:Methacrylates
End Uses:Top Coat
Features:Yellowing Resistance, Improved Hardness, Low Viscosity, High Capacity of Penetration, Chemical Resistance

SILIKAL® R 71 resin (SILIKAL® R 71 re resin) is a reactive, solvent-free, low-viscosity and almost non-yellowing 2-component me thacrylic resin offering high hardness and good resistance to chemicals. The extremely low viscosity enhances the penetrative capacity of the resin in sand-sprinkled surfaces. Its high hardness guarantees outstanding resistance to chemicals.

Silikal® RH 65 resin

Chemical Family:Poly(methyl methacrylate) (PMMA), Methacrylates
Compatible Substrates & Surfaces:Concrete
Features:Fast Cure, Low Viscosity

SILIKAL® RH 65 resin s a solvent free, fast curing MMA resin of very low viscosity. It is used for indoor screeds of 5-20 mm on concrete to equalize an uneven concrete surface. Screeds must be overlaid with a Silikal® coating system according to System A – E. The fast curing time of 1 hour, flexibility and filler rich formulation of 1 : 8 makes the mortar economical and can be applied at temperatures between 0°C and 35°C (refer to table of hardener). Hot water loadings must be limited to 60 °C. Excess temperature up to 80 °C will be accepted for a short moment as long as the temperature of the complete layer does not adopt the higher degree.

Silikal® R 82 resin

Chemical Family:Methacrylates
End Uses:Top Coat
Features:Water Resistance, Low Viscosity, High Capacity of Penetration, Yellowing Resistance

SILIKAL® R 82 resin is a reactive, solvent-free, low-viscosity, virtually non-yellowing 2-component methacrylic resin offering good resistance to water interaction. It serves primarily as a slightly elasticized and colorless top coat on sprinkled coatings in wet areas. The low viscosity enhances the penetrative capacity of the resin in sand-coated surfaces. Hot water stress is limited to +60 °C. The temperature stress may be increased to +80 °C for short periods, e. g. to allow cleaning, provided that the coating is not thoroughly warmed through to the substrate.

View All Products (8)

View All Products