Products

Our vinyl ester laminating resin was formulated with an epoxy vinyl ester polymer This gives it very good physical properties and a high resistance to corrosion and penetration of water. This resin is recommended for the manufacture of FRP structures of small to large size with high production rates at room temperature. It is formulated to cure at room temperature with methyl ethyl ketone peroxide.

The formulation of our high performance Marine ISO/NPG Gel coats are based on a special ISO/NPG polyester resin. These products were developed to provide good durability and superior flexibility, while keeping high quality finish and minimal maintenance. Additionally, their excellent Air Dry times make them suitable for repairs and repainting. The combination of neopentylglycol and isophtalic acid provides excellent resistance, not only to water blistering and osmosis, but also to the UV light.

Sogel Aquaguard Shimmer Gel coats are developed from a proprietary ISO/NPG resin with high quality pigments and special additives. These gel coats provide excellent resistance to chlorine, blush/blister resistance, weathering resistance, and gloss retention. They have very good flexibility and crack resistance at demold.

Sogel Sanitary Gel coats have been developed from an ISO/NPG resin in combination with pigments and high quality additives. These high performance gel coats offer high resistance to osmosis, making them ideal for sanitary applications. Our line of Sanitary Gel coats are in compliance with the requirements of the American National Standard for plastic baths and showers as well as with the MACT standard of the EPA for the manufacture of composite materials.

Sogel Clear Gel coats have been formulated from ISO / NPG resin to provide a clear finish with very good long-term abrasion and stain resistance. These gel coats have very good application properties and surface finish.

The formulation of our high performance ISO/NPG Gel coats are based on a special ISO/NPG polyester resin. These products were developed to provide good durability and superior flexibility, while keeping high quality finish and minimal maintenance. The combination of neopentylglycol and isophtalic acid provides excellent resistance to water blistering and osmosis, excellent resistance to chlorine and to the UV light.

Sogel Aquaguard Gel coats are developed from a proprietary ISO/NPG resin with high quality pigments and special additives. These gel coats provide excellent resistance to chlorine, blush/blister resistance, weathering resistance, and gloss retention. They have very good flexibility and crack resistance at demold.

Our Vinyl Ester Barrier Coat was developed from special thixotropic vinyl ester resins. This coating acts as a barrier coat between the laminate and the gelcoat. This formulation provides superior osmosis resistance along with enhanced thermal and cracking resistance properties. Sogel’s Vinyl Ester Barrier Coats allow accelerating the cure and the demoulding time, while strongly reducing the risk of print through, orange peel and blisters on gelcoat surface.

Our Polyester Barrier Coat was developed from a proprietary resin blend with high quality raw materials and special additives. This coating acts as a barrier coat between the laminate and the gelcoat. This formulation provides superior osmosis resistance along with enhanced thermal and cracking resistance properties. Sogel’s Polyester Barrier Coats allow accelerating the cure and the demoulding time, while strongly reducing the risk of print through, orange peel and blisters on gelcoat surface.

Sogel Sanding Gel coats were developed from a polyester resin to provide very good elongation to reduce cracks. In addition, it has a low volume shrinkage which gives a better surface finish. Their rheological properties give them optimal vaporization characteristics, to resist porosity and flow on vertical walls.