Knowde Enhanced TDS
Features & Benefits
- FEATURES
- Minimal heat generation during application allows for thick lifts.
- No toxic heavy metal catalysts.
- No ozone depleting products (ODP).
- No bromine or other halogenated components.
- No formaldehyde components.
- Mildew, bacteria, and fungus resistant.
- Contains renewable resource components.
- Considered safe for burial and landfill disposal.
- Compliant with USDA/FDA requirements for incidental
- food contact. Zero VOC and solvent free. Typical return to service time is minutes not hours
Applications & Uses
- RECOMMENDED USES
- Concrete slab, road, and runway lifting
- Stabilize unconsolidated soil
- Cavity/void fill
- Concrete slab stabilization
Other Uses
- Geo-Technical applications
- Ditch damming
- Trench breakers
- Mine and tunnel decommissioning
- Pipe, tank, and well decommissioning
- Pole setting in lieu of concrete
Technical Details & Test Data
- DENSITIES & REACTIVITIES AVAILABLE
Densities
Available
lbs./cu. ft.Free Rise
Core (FRC)
ASTM D1622/
D1622M-14Typical In Place (Confined)
*Density
(estimated)Compressive Strength ASTM D1621-00 2.0 lb. 1.9 - 2.2 2.2 - 4.0 27 psi @ 2.2 2.5 lb. 2.4 - 2.7 2.8 - 4.5 34 psi @ 2.8 3.0 lb. 2.9 - 3.2 3.2 - 5.5 38 psi @ 3.2 4.0 lb. 3.9 - 4.2 4.2 - 6.5 75 psi @ 4.2 5.0 lb. 4.9 - 5.2 5.2 - 8.0 102 psi @ 5.2 6.0 lb. 5.9 - 6.2 8.0 - 10.0 200 psi @ 8.0 Reactivities Available @ 150°F (66°C)(sec) CREAM (sec) RISE (sec) 6.0 - 7.0
25.0 (@77°F)40 - 45
90 - 1108.0 - 9.0
42.0 (@77°F)60 - 70
150 - 180- TYPICAL “A” & “B” LIQUID PROPERTIES
Mixing ratio, % by volume “A” 50 “B” 50 Weight per gallon
(approx.)“A” 10.3 lbs. (4.67 kg)
“B” 8.8 - 9.0 lbs.
(4.0 - 4.08 kg)Viscosity @ 77°F (25°C) “A” 195 ± 50 cps
“B” 500 - 800 ± 50 cpsColor “A” Amber
“B” Light YellowStorage Temperature 60° - 90°F (15° - 32°C) Shelf Life (unopened) *12 months *When continuously stored and maintained at above temperatures. - LIMITATIONS
- ECO-RISE™ is for professional use only. User must be proficient in the application of ECO-RISE™ and the use of the high pressure heated plural component equipment used to
- apply it.
- Minimum material/container temperature for application is 70°F (21°C). Apply product when surface and air temperatures are above 40°F (5°C) and the surface temperature is at least 5°F (3°C) above dew point and rising.
- This product has not been tested for flame spread or smoke development.
- Not to be installed within two inches (2”) of heat emitting devices, where temperatures is in excess of two hundred degrees (200°F).
- Maximum service temperature; constant 200°F (93°C), intermittent 250°F (121°C).
- PROCESSING EQUIPMENT
MACHINES: GRACO
(Gusmer, Glasscraft)- H-XP2
- Reactor2 H-XP2
- H-XP3
- Reactor2 H-XP3
- *H25
- *Reactor2 H-30
- *H-40
- *Reactor2 H-40
- *H-50
- *Reactor2 H-50
- 20/35
- 20/35 Pro
- *E-XP1
- E-XP2
- Reactor2 E-XP2
- E-XP2i
- *E-30
- *E-30i
- *Reactor2 E-30
- *E-10hp
- A-XP1
- *A-25
- H3500
- HV 20/35
PMC - PAX-25
- *PMCA-20
- *PA-25
- *PH-2
- *PH-25
- PH-40*
- PHX-2
- PHX-25
- PHX-40
SPRAY FOAM
EQUIP & MFG5/12K*
6/6K*6/12K *2,000 psi machines GUNS: GRACO
(Gusmer, Glasscraft)- Fusion MP
- GAP Pro
- GX7-DI
- GX-8 Pro
- GX7-400
- P2
- P2 Elite
- P2 Elite “C”
PMC AP-2 SPRAY FOAM
EQUIP & MFGBoss - Standard 1:1 ratio, heated plural component equipment developing a minimum of 1100 psi (8.34 mpa) dynamic pressure with heating capabilities to 150°F (66°C) will
adequately process ECO-RISE™. - Primary heater temperature should be at 130-150°F (71-76°C).
- Hose temperature should be 130° - 150°F) (54° - 66°C). A hose thermometer inserted under the insulation near the gun should read a minimum of 110°F (43°C).
CAUTION: Extreme care must be taken when removing and reinstalling drum transfer pumps so as NOT to reverse the “A” and “B” components.
Packaging & Availability
- CONTAINER SIZES
This product is sold in standard 100 gallon drum and 500 gallon tote sets. Material containers are translucent, allowing applicators to view fluid levels. Available in other container
sizes.
Storage & Handling
- STORAGE & HANDLING
Maintain storage area for materials between 60 - 90F° at all times.