Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
SSP-1401-L is a silicone lubricating compound that meets the requirements of the MIL-S-8660C specification and is part of the U.S. government’s Qualified Products List (QPL). This light-bodied silicone compound is comparable to DC 4 electrical insulating compound from Dow Corning, and to G-624 dielectric silicone grease from Novagard.
- Features
- Low Volatiles
- Excellent Dispersion
- Wide Temperature Range
- Excellent Stability
- Water Repellent
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Applications
SSP-1401-L is used in applications that require conformance and certification to MIL-S-86660C requirements for non-melting, heat-stable silicone compounds. Moisture proofing, electrical insulation, and mechanical lubrication applications include electrical connections, ignition systems, electronics components, threaded connectors, and plastic and rubber parts.
Properties
- Appearance
- White/Translucent
- Typical Properties
Value | Units | Test Method / Conditions | |
Bleed (30hr at 204°F) | 2.0 | % | - |
Corrosive Effect (on metals/nonmetals) | No effect | - | - |
Dielectric Constant (1 KHz) | max. 2.7 | - | - |
Dielectric Constant (1 MHz) | max. 2.8 | - | - |
Dielectric Constant (10 MHz) | max. 2.2 | - | - |
Dielectric Strength (0.010” gap) | 550.0 | Volts/mil | - |
Dielectric Strength (0.050” gap) | 330.0 | Volts/mil | - |
Dissipation Factor (10 MHz) | max. 0.001 | - | - |
Dissipation Factorat (1 Mhz) | max. 0.0002 | - | - |
Dissipation Factorat (1Khz) | max. 0.0006 | - | - |
Evaporation | 0.01 | - | - |
Flammability | Non Flammable | - | - |
Insolubility (% weight loss, Distilled water) | 0.013 | - | - |
Insolubility (% weight loss, Ethyl Alcohol) | 0.044 | - | - |
Insolubility (% weight loss, Ethylene Glycol) | 0.012 | - | - |
Insolubility (% weight loss, Glycerine) | 0.013 | - | - |
Insolubility (% weight loss, Isopropyl Alcohol) | 0.025 | - | - |
Low Temp Torque (Running) | max. 516 | gm-cm | - |
Low Temp Torque (Starting) | max. 885 | gm-cm | - |
Specific Gravity | 1.01 | - | - |
Temperature Range | (‐75) - 400 | °F | - |
Unworked Penetration | 230.0 | - | - |
Volume Change of Rubber (168hrs at 70°C) | 0.6 | % | - |
Volume Resistivity (177°C) | 3.7 x 1 0^13 | ohm/cm | - |
Volume Resistivity (23°C) | 3.8 x 1 0^13 | ohm/cm | - |
Worked Penetration | 275.0 | - | - |
Arc Resistance (No Failure, 100 % of samples) | min. 60 | seconds | - |
Packaging & Availability
- Packaging Type
- Packaging
SSP-1401-L is supplied in drums, plastic pails, jars, cartridges, and plastic tubes.
- 400 lb Drum
- 40 lb Plastic Pail
- 8 lb. Plastic Pail
- 1 lb Jar
- 14.1 oz Cartridge
- 5.3 oz Plastic Tube