company tower banner
Stepan Company Company Logo

BIO-SOFT® EC-600

1 of 56 products in this brand
BIO-SOFT® EC-600 is a nonionic surfactant blend featuring an hlb (hydrophilic-lipophilic balance) value of 10.6. This versatile surfactant finds use in wetting, emulsification, and as a degreasing booster within industrial cleaners, detergents, and paint additives. One of its notable features is its comparison to np-6 (nonylphenol ethoxylate), where bio-soft® n-600 exhibits rapid wetting properties. It effectively replaces nonylphenol ethoxylates as a more environmentally friendly option. Furthermore, it aligns with the standards set by the u.S. Epa safer choice program's surfactant screen, and its inclusion on cleangredients underscores its commitment to sustainable formulations.

Functions: Emulsifier, Surfactant, Surfactant (Nonionic), Wetting Agent

Labeling Claims: Bio-based, Plant-Based

Certifications & Compliance: Kosher

Knowde Enhanced TDS

Identification & Functionality

CAS No.
68002-97-1
EC No.
500-182-6
Chemical Structure

CH3(CH2)n-O(CH2CH2O)yH

n = 11-13
y = average moles of ethoxylation

Features & Benefits

Labeling Claims
Agrochemicals Features
Features

Preservative Free

Biodegradability

Product is readily biodegradable.

Applications & Uses

Applications

BIO-SOFT EC series are nonionic surfactants prepared by ethoxylating fatty alcohol. The BIO-SOFT EC series products are stable in both aqueous acidic and alkaline solutions, allowing for application in a wide range of products. They provide moderate, stable foam and high detergency for use in laundry products, consumer and I&I hard surface cleaners. The BIO-SOFT EC series products are water soluble and highly effective at low concentrations, working well in warm and hot water applications.

Properties

Physical Form
Appearance
Clear to hazy liquid (at 30°C)
Soluble in
Water
Stable in
Alkaline solutions, Aqueous acidic solutions
Typical Properties
ValueUnitsTest Method / Conditions
Colormax. 50Apha Scale
Density0.96g/ml
Average Number of Moles of Ethylene Oxide7
HLB12.2
Flash Pointmin. 94°CPMCC Flash Point Tester
pH (1% in 10:6 IPA:Water)6.8
Pour Point19°C
Actives Contentmin. 99.5%
Viscosity (at 25°C)50cPs
Cloud Point (in 1% aqueous solution)51°C
Regulated Volatile Organic Chemicals0%U.S. EPA

Regulatory & Compliance

Certifications & Compliance

Safety & Health

Toxicity

The BIO-SOFT EC-Series products are moderately toxic orally (Oral LD₅₀ rat; undiluted 930-2140 mg/kg). Undiluted, the BIO-SOFT EC series products are moderately to severely irritating to skin and severely irritating to eye; while a 1% dilution generally causes slight to mild skin irritation.

Packaging & Availability

Packaging Type
Standard Packaging

The BIO-SOFT EC series products are available in bulk and 205 kilogram drums.

Storage & Handling

Storage & Handling
  • Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling BIO-SOFT EC series products. Contact with eyes and skin should be avoided. Wash exposed areas thoroughly after handling material.
  • While diluting the BIO-SOFT EC series products, as with all alcohol ethoxylates, they are prone to gelling. If the product is diluted into water, heating may be required to minimize or eliminate gel formation. It is recommended that the BIO-SOFT EC series products be stored in sealed containers and kept in a cool, dry place. If material is frozen, it should be heated gently, and stirred to ensure it is homogeneous before use.
Workplace Exposure

Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.