Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- Agrochemical Functions
- Cleaning Ingredients Functions
- CAS No.
- 66455-14-9
- EC No.
- 500-165-3
- Technologies
- Product Families
- Surfactant Type
Nonionic.
Features & Benefits
- Labeling Claims
- Agrochemicals Features
- HII Features
- Features
- Preservative Free
- NPE replacement
- Easy to handle
- Biodegradability
BIO-SOFT N-600 is expected to be readily biodegradable.
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
Institutional and Industrial Cleaning, C.A.S.E., Paint Additives, Oilfield.
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear to slightly hazy liquid (at 25°C)
- Typical Properties
Value Units Test Method / Conditions Cloud Point (1% in water) max. 25 °C - Actives Content 100 % - Color 10 - Apha Scale Critical Micelle Concentration (CMC) 10 mg/l - pH (1% in Water) 5.5 - 7.5 - - HLB 10.6 - - Ethylene Oxide Content 53 wt% - Viscosity (at 25°C) 70 cPs - Viscosity (at 38°C) 30 cPs - Flash Point min. 94 °C PMCC Flash Point Tester Hydroxyl Value 134 mg KOH/g - Molecular Weight 410 g/mol - Freeze Point 9 °C - Pour Point 5 °C - Density (at 25°C) 0.928 g/ml - Density (at 38°C) 0.918 g/ml - Surface Tension (in 0.1% aqueous solution) 28 dynes/cm - Draves Wetting (at 25°C, 0.1% in Water) 15 sec - Draves Wetting (at 60 °C, 0.1% in Water) 13 sec - Regulated Volatile Organic Chemicals 0 % U.S. EPA Ross-Miles Foam Height (in 0.1% actives, initial) 4.5 cm - Ross-Miles Foam Height (in 0.1% actives, 5min) 4 cm -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of BIO-SOFT N-600 are listed in the following countries; the registration numbers for the active ingredients are included in parentheses: Australia (AICS 66455-14-9), Canada (DSL 66455-14-9), China (IECSC 66455-14-9), Japan (ENCS 7-97), Korea (ECL Serial No. KE-13386), New Zealand (NZIoC 66455-14-9), Philippines (PICCS 66455-14-9), Taiwan (TCSI 66455-14-9), and United States (TSCA 66455-14-9).
Technical Details & Test Data
- Emulsification Versatility
BIO-SOFT® N-Series Blends have a high capacity for emulsifying a variety of fragrance, industrial, and food oils.
Method: Oil emulsification capacity, 10 wt% nonionc in deionized water titrated with oil to form a stable emulsion for 20 min, 22°C, required HLB for d-limonene = 12, petroleum oils = 10, canola oils = 7.
- Rapid Wetting
BIO-SOFT® N-400 and BIO-SOFT® N-600 wet surfaces in a fraction of the time compared to the NPE equivalents.
Method: Draves wetting, ASTM D2188-10, 5-g skein, 3-g hook, 0.1 wt% nonionic, deionized water, 25°C.
Safety & Health
- Toxicity
BIO-SOFT N-600 is slightly toxic orally (LD₅₀ > 2,000 mg/kg), and at 10% active causes slight skin and moderate eye irritation.
Packaging & Availability
- Packaging Type
- Standard Packaging
BIO-SOFT N-600 is available in drums (400 lb, 181 kg), totes (2010 lb, 912 kg), and in bulk quantities.
Storage & Handling
- Storage & Handling
- While diluting BIO-SOFT N-600, as with all alcohol ethoxylates, it is prone to gelling. If the product is diluted into water, heating may be required to minimize or eliminate gel formation.
- Non-Bulk Storage Recommendations: BIO-SOFT N-600 should be stored in closed containers and kept in a cool, dry place away from incompatible materials (see Section 10 of the SDS). In general, as with all alcohol ethoxylates, non-bulk packages should be stirred to ensure they are homogeneous before use. If material is frozen, it should also be heated gently and stirred to ensure it is homogeneous before use.
- Bulk Storage Recommendations: BIO-SOFT N-600 should be stored in vessels of 316 stainless steel or fiberglass with a corrosion liner. Heating and agitation are recommended for outside storage. Material should be stored between 95-131 °F (35-55 °C). An internal hairpin coil of 316 stainless steel with low pressure steam (under 50 psig) should be used if heating is required. Pumps, pipes and transfer lines should be 316 stainless steel.
- Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling BIO-SOFT N-600. Contact with eyes, nose or prolonged contact with skin should be avoided. Wash thoroughly after handling BIO-SOFT N-600.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.