Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Agrochemical Functions
- Cleaning Ingredients Functions
- CAS No.
- 34398-01-1
- EC No.
- 500-084-3
- Technologies
- Product Families
- Surfactant Type
Nonionic.
Features & Benefits
- Labeling Claims
- Agrochemicals Features
- HII Features
- Features
Preservative Free
- Biodegradability
BIO-SOFT N1-73B is expected to be readily biodegradable.
Applications & Uses
- Applications
- Home Care Applications
Properties
- Physical Form
- Appearance
- Clear to slightly hazy liqui (at 20°C)
- Typical Properties
Value | Units | Test Method / Conditions | |
Actives Content | 100 | % | — |
Color | 10 | — | Apha Scale |
pH (1% in 10:6 IPA:Water) | 6 | — | — |
HLB | 11.6 | — | — |
Ethylene Oxide Content | 58 | wt% | — |
Viscosity (at 25°C) | 35 | cPs | — |
Viscosity (at 38°C) | 25 | cPs | — |
Flash Point | min. 94 | °C | PMCC Flash Point Tester |
Hydroxyl Value | 137 | mg KOH/g | — |
Molecular Weight | 427 | g/mol | — |
Cloud Point (1% in water) | 38 | °C | — |
Pour Point | 6 | °C | — |
Freeze Point | -3 | °C | — |
Density (at 25°C) | 0.962 | g/ml | — |
Density (at 25°C) | 0.969 | g/ml | — |
Draves Wetting (at 25 °C, 0.1% in Water) | 3 | sec | — |
Draves Wetting (at 60 °C, 0.1% in Water) | 3 | sec | — |
Regulated Volatile Organic Chemicals | 0 | % | U.S. EPA |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of BIO-SOFT N1-73B are listed in the following countries; the registration number for the active ingredient is included in parentheses: Australia (AICS 34398-01-1), Canada (DSL 34398-01-1), China (IECSC 34398-01-1), Japan (ENCS 7-97), Korea (ECL Serial No. KE-28888), New Zealand (NZIoC 34398-01-1), Philippines (PICCS 34398-01-1), and United States (TSCA 34398-01-1).
Safety & Health
- Toxicity
BIO-SOFT N1-73B is slightly toxic orally (LD₅₀ > 2,000 mg/kg), and at 10% active causes slight skin and moderate eye irritation.
Packaging & Availability
- Standard Packaging
BIO-SOFT N1-73B is available in drums and in bulk quantities.
Storage & Handling
- Storage & Handling
- While diluting BIO-SOFT N1-73B, as with all alcohol ethoxylates, it is prone to gelling. If the product is diluted into water, heating may be required to minimize or eliminate gel formation.
- Non-Bulk Storage Recommendations: BIO-SOFT N1-73B should be stored in closed containers and kept a cool, dry place away from incompatible materials (see Section 10 of the SDS). In general, as with all alcohol ethoxylates, non-bulk packages should be stirred to ensure they are homogeneous before use. If material is frozen, it should also be heated gently and stirred to ensure it is homogeneous before use.
- Bulk Storage Recommendations: BIO-SOFT N1-73B should be stored in vessels of 316 stainless steel or fiberglass with a corrosion liner. Heating and agitation are recommended for outside storage. Material should be stored between 95-131 °F (35-55 °C). An internal hairpin coil of 316 stainless steel with low pressure steam (under 50 psig) should be used if heating is required. Pumps, pipes and transfer lines should be 316 stainless steel.
- Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling BIO-SOFT N1-73B. Contact with eyes, nose or prolonged contact with skin should be avoided. Wash thoroughly after handling BIO-SOFT N1-73B.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.