Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- INCI Name
- Agrochemical Functions
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- CAS No.
- 9003-11-6
- EC No.
- 618-355-0
- Technologies
- Product Families
- Chemical Structure
- Surfactant Type
Nonionic.
Features & Benefits
- Benefit Claims
- Labeling Claims
- Agrochemicals Features
- HII Features
- Biodegradability
Publically available data shows this type of chemistry to be inherently biodegradable.
- Benefits
Preservative Free.
- Product Benefits
- Preservative Free
- Product Features
EO-PO-EO block copolymers are best used as individual low-foam surfactants when the EO content is lower, such as MAKON L61 and MAKON L101. Figure 3 shows Stepan’s EO/PO block copolymers that generate less than 1 cm of foam. PO-EO-PO reverse block copolymers, such as MAKON 17R2 and MAKON 17R4, are good foam controllers in the presence of other foaming sources. Reverse block copolymers also create a destabilization of foam structure (Figure 4) and can enhance foam break.
Figure 3: Foamability
Method: Spinning method with Dynamic Foam Analyzer (6,000 rpm, 25 seconds), 0.05 wt% surfactant in deionized water at 25°C.
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Industrial Additives End Use
- Applications
MAKON L62 is a nonionic EO/PO block copolymer that exhibits low foaming, good oil-in-water emulsification properties, and water solubility. MAKON L62 can be used in a variety of markets including Household, Industrial, Institutional, Agriculture, Paints and Coatings, Metalworking, Pulp and Paper, and Textiles. Applications for best fit are metal cleaning, spray wash, warewash, rinse aids, general purpose cleaning, textile wetting, and agricultural pesticide formulations. MAKON L62 is a low ash product.
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear to slightly hazy liquid
- Soluble in
- Water
- Typical Properties
Value Units Test Method / Conditions pH (in 2.5% Aqueous) 5 - 8 - - Actives Content 100 % - Water Content max. 0.4 % - Color max. 50 - Apha Scale HLB 7 - - Average Molecular Weight 2500 g/mol - Hydroxyl Value 45 mg KOH/g - Cloud Point (in 10% Aqueous) 24 °C - Cloud Point (in 1% Aqueous) 32 °C - Pour Point -41 °C - Flash Point min. 94 °C - Viscosity (at 25°C (77 °F) / 38°C (100 °F)) 466 / 22 cPs - Density (at 25°C, 77°F) 1.04 g/ml - Density (at 38°C) 1.03 g/ml - Surface Tension (in 0.1% Aqueous) 42.3 dynes/cm - Interfacial Tension with Light Mineral Oil (in 0.1% Aqueous) 13.9 dynes/cm - Draves Wetting (in 0.1% Aqueous, at 25°C, 77 °F) 32 / min. 90 sec - Foam Height (0.1% Aqueous, Initial / 5 min, mm, at 25 °C, 77 °F) 16 / 1 mm - Foam Height (0.1% Aqueous, Initial / 5 min, mm, at 25 °C, 77 °F) 29 / 11 mm - Foam Height (0.1% Aqueous, Initial / 5 min, mm, at 50 °C, 122 °F) 20 / 8 mm - Solubility in Water (at 25 °C, 77 °F) min. 10 wt% -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of MAKON L62 are listed in the following countries; the registration numbers for the active ingredients are included in parentheses: Australia (AICS 9003-11-6), Canada (DSL 9003-11-6), China (IECSC 9003-11-6), Japan (ENCS (7)-1246), Korea (ECL Serial No. KE-24574), New Zealand (NZIoC 9003-11-6), Philippines (PICCS 9003-11-6), Taiwan (TCSI 9003-11-6), and United States (TSCA 9003-11-6). It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Packaging & Availability
- Packaging Type
- Standard Packaging
MAKON L62 is available in drums, totes, and bulk quantities.
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling MAKON L62. Contact with eyes, nose or prolonged contact with skin should be avoided. Wash thoroughly after handling MAKON L62. Product temperatures over 122°F (50°C) are not recommended.
Non-Bulk Storage Recommendations
MAKON L62 should be stored in closed containers and kept in a cool, dry place away from incompatible materials (see Section 10 of the SDS). If material is frozen, it may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up.
Bulk Storage Recommendations
MAKON L62 should be stored in vessels of 316 stainless steel, but carbon steel is adequate assuming effective moisture exclusion. Elevated storage temperature may be desirable to maintain ease of pumping.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace safety precautions should be used to control these exposures.