Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Chemical Name
- INCI Name
- Agrochemical Functions
- CASE Ingredients Functions
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- Fluids & Lubricants Functions
- Industrial Additives Functions
- Technologies
- Product Families
- Chemical Structure
- Surfactant Type
Nonionic.
Features & Benefits
- Benefit Claims
- Labeling Claims
- Agrochemicals Features
- CASE Ingredients Features
- Fluids & Lubricants Features
- HII Features
- Features
Preservative Free
Applications & Uses
- Markets
- Applications
- Application Format
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Home Care Applications
- I&I Cleaning Applications
- Industrial Additives End Use
- Personal Hygiene Applications
- Skin Care Applications
- Applications
MAKON L64 is a non-ionic EO/PO block copolymer that exhibits low foaming properties, good detergency, and water solubility. MAKON L64 can be used in a variety of markets including Household, Industrial, Institutional, Agriculture, Paints and Coatings, Metalworking, Pulp and Paper, and Textiles. Applications for best fit are laundry, floor cleaning, food processing, rinse aids, pulp and paper, and agricultural pesticide formulations. MAKON L64 is a low ash product.
Properties
- Formulation Type
- Physical Form
- Appearance
- Hazy liquid (at 25°C)
- Typical Properties
Value Units Test Method / Conditions Average Molecular Weight 2900 g/mol - pH (2.5% in aqueous solution) 5 - 8 - - Actives Content 100 % - Color max. 50 - Apha Scale HLB 15 - - Cloud Point (in 10% Aqueous Solution) 60 °C - Hydroxyl Value 39 mg KOH/g - Cloud Point (in 1% aqueous solution) 58 °C - Flash Point min. 94 °C - Pour Point 18 °C - Water Content max. 0.4 % - Viscosity (at 25°C) 494 cPs - Density (at 25°C) 1.05 g/ml - Density (at 38°C) 1.04 g/ml - Surface Tension (in 0.1% aqueous solution) 41.5 dynes/cm - Interfacial Tension with Light Mineral Oil (0.1% Aqueous) 13.9 dynes/cm - Draves Wetting (at 25 °C, in 1.0% aqueous solution) 42 sec - Blender Foam Height (at 25 °C, in 0.1% aqueous solution, 5 min) 0 mm - Blender Foam Height (at 25 °C, in 0.1% aqueous solution, 5 min) 15 mm - Blender Foam Height (at 25 °C, in 0.1% aqueous solution, Initial) 13 mm - Blender Foam Height (at 25 °C, in 0.1% aqueous solution, Initial) 35 mm - Blender Foam Height (at 50 °C, in 0.1% aqueous solution, Initial) 16 mm - Blender Foam Height (at 50 °C, in 0.1% aqueous solution, Initial) 88 mm - Draves Wetting (at 25 °C, in 0.1% aqueous solution) min. 90 sec - Viscosity (at 38°C) 240 cPs - Solubility (25 °C, Water) min. 10 wt% - Regulated Volatile Organic Chemicals 0 % U.S. EPA
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of MAKON L64 are listed in the following countries; the registration numbers for the active ingredients are included in parentheses: Australia (AICS 9003-11-6), Canada (DSL 9003-11-6), China (IECSC 9003-11-6), Japan (ENCS (7)-1246), Korea (ECL Serial No. KE-24574), New Zealand (NZIoC 9003-11-6), Philippines (PICCS 9003-11-6), Taiwan (TCSI 9003-11-6), and United States (TSCA 9003-11-6).
Packaging & Availability
- Packaging Type
- Standard Packaging
MAKON L64 is available in drums, totes, and bulk quantities.
Storage & Handling
- Storage & Handling
- Non-Bulk Storage Recommendations: MAKON L64 should be stored in closed containers and kept in a cool, dry place away from incompatible materials. If material is frozen, it may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up.
- Bulk Storage Recommendations: MAKON L64 should be stored in vessels of 316 stainless steel, but carbon steel is adequate assuming effective moisture exclusion. Elevated storage temperature may be desirable to maintain ease of pumping.
- Product temperatures over 122 °F (50 °C) are not recommended.
- Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling MAKON L64. Contact with eyes, nose or prolonged contact with skin should be avoided. Wash thoroughly after handling MAKON L64.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace safety precautions should be used to control these exposures.