Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- Agrochemical Functions
- CAS No.
- 104376-75-2
- EC No.
- 600-560-1
- Technologies
- Product Families
- Surfactant Type
Nonionic.
Applications & Uses
- Markets
- Applications
- Applications
The product can be used as nonionic emulsifiers or dispersants in a variety of agricultural formulations, including suspension concentrates, emulsifiable concentrates and microemulsions.
Properties
- Formulation Type
- Physical Form
- Appearance
- Hazy amber liquid
- Soluble in
- Water, Methanol, Xylene
- Insoluble in
- Kerosene
- Typical Properties
Value Units Test Method / Conditions Density (at 25°C) 1.11 g/ml - Moisture Content 0.1 % - pH (in 5% aqueous) 9 - - Viscosity (at 25°C) 920 cPs - Flash Point min. 94 °C - Cloud Point (in 1% in Deionized Water) 62 °C - Pour Point 19 °C - Color 3 - Gardener Scale HLB (Calculated) 13 - - Moles of EO Average 16 - -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
The international inventories (country clearances) for the MAKON TSP Series surfactants can be found in Section 15 of the Safety Data Sheet (SDS). It is the responsibility of the formulator to review the chemical control regulations for each country where the end-product is intended to be sold or used.
Safety & Health
- Health Effects
MAKON TSP surfactants were found to be practically non-toxic orally in rats (LD50> 16,000 mg/kg). It may cause slight skin and eye irritation.
Packaging & Availability
Storage & Handling
- Storage & Handling
Bulk Storage Recommendations
MAKON TSP surfactants should be stored in vessels of 316 stainless steel or glass fiber-reinforced polyester tanks. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures up to 130°F (54°C) can be maintained without degradation of the product. MAKON TSP surfactants that have been stored in drums at low temperatures may thicken or solidify. Product may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 130°F (54°C) are not recommended. Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling MAKON TSP surfactants. Contact with eyes, nose or prolonged contact with skin should be avoided. Wash thoroughly after handling MAKON TSP surfactants. See SDS for more information.