Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- Agrochemical Functions
- CAS No.
- 26264-06-2
- EC No.
- 247-557-8
- Technologies
- Product Families
- Surfactant Type
Anionic.
Features & Benefits
- Product Features & Benefits
- Improves the dispersion of emulsion upon dilution
- Easy-to-handle, viscous liquid form at room temperature
Applications & Uses
- Markets
- Applications
- NINATE 60L is an anionic surfactant that is used in combination with nonionic surfactants to form effective emulsifier systems for many pesticide emulsifiable concentrate formulations.
- NINATE 60L is an aromatic hydrocarbon-based product, suitable for regular application
- with no flash point concern.
- EC, EW, ME, OD, ready-to-use (RTU), SC, SE, water dispersible granules (WG) and wettable powders (WP)
Properties
- Formulation Type
- Physical Form
- Appearance
- Amber liquid
- Insoluble in
- Water
- Soluble in
- Kerosene, Methanol, Xylene
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 25 °C) | 1.02 | g/ml | — |
| Moisture Content | max. 0.8 | % | — |
| pH (in 5% in 1:1 IPA/H2O) | 4.5 - 5.5 | — | — |
| Viscosity (at 50°C) | max. 10,000 | cPs | — |
| Flash Point | 54 | °C | — |
| Pour Point | -11 | °C | — |
| Activity (MW 342) | 60 | % | — |
| Regulated Volatile Organic Chemicals (Ethanol) | 33 | % | U.S. EPA |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of NINATE 60L are listed in the following countries; the registration number for the active ingredient is included in parentheses: United States (TSCA 68584-23-6), Europe (EINECS No. 271-529-4), Canada (DSL 68584-23-6), Korea (ECL Serial No. KE-02599), China (IECSC 68584-23-6), Philippines (PICCS 68584-23-6), New Zealand (NZIoc 68584-23-6), and Australia (AICS 68584-23-6). NINATE 60L is approved for use as an inert ingredient under U.S. EPA 40 CFR 180.910.
Packaging & Availability
- Standard Packaging
NINATE 60L is available in drums (450 lb, 205 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling NINATE 60L. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials. Use product in a well-ventilated area away from sparks and open flame.
Bulk Storage Information
Stainless steel and glass fiber-reinforced polyester tanks are recommended. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures up to 120°F (49°C) can be maintained for long periods of time without degradation of the product. NINATE 60L which has been stored in drums at temperatures below 25°F (-4°C) may thicken or solidify. It may be fluidized by warming with a drum heater or in a steam room. Drums should be vented during heating to avoid excessive pressure build up. Product temperatures over 130°F (54°C) are not recommended, as excessive solvent loss may occur. The flash point may be exceeded when warming to pump but the temperature should be below the flash point for storage. Keep away from open flames and provide ventilation.