Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Chemical Name
- Agrochemical Functions
- CASE Ingredients Functions
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Agrochemicals Features
- CASE Ingredients Features
- Biodegradability
G-3300 is biodegradable.
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Coating Type
- Applications
G-3300 is an amine salt of alkylbenzene sulfonic acid. It may be used as a pigment dispersant in both water and oil based paints. It may also be used in combination with other surfactants to design specialty emulsifiers. G-3300 is an effective wetting agent for use in waterborne coatings. It can be incorporated during the letdown phase of production or post added to the final formulation. Typical use level, based on active content, is 2 – 6 lbs/100 gallons, however, optimal dosing should be determined by performing a ladder study. G-3300, may also positively impact the following coatings properties:
- Gloss
- Color Acceptance
- Washability
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear amber liquid (at 25°C)
- Insoluble in
- Vegetable oils
- Slightly Soluble in
- Water
- Dispersible in
- 5% Solutions of Hydrochloric Acid and Sulfuric Acid
- Stable in
- Acetone, Methanol, Mineral spirits, Kerosene, Toluene
- Typical Properties
Value Units Test Method / Conditions Actives Content min. 90 % - Color 8 - Gardner Scale Density (at 25°C) 1.03 g/ml - Flash Point 92 °C PMCC Flash Point Tester Freeze Point -7.7 °C - HLB 11.7 - - Moisture Content 3.5 % - pH (20% in 1:1 IPA/H₂O) 3.8 - - Pour Point -5.6 °C - Regulated Volatile Organic Chemicals 0 % U.S. EPA Viscosity (at 25°C) 6000 cPs -
Regulatory & Compliance
- Chemical Inventories
- Clearances
The international inventories (country clearances) of G-3300 can be found in Section 15 of the Safety Data Sheet (SDS). It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Packaging & Availability
- Packaging Type
- Standard Packaging
G-3300 is available in bulk, drum and tote quantities.
Storage & Handling
- Storage & Handling
- Bulk Storage Information: Tanks made of 316 stainless steel or fiberglass with Atlac 382 corrosion liner are recommended. Positive displacement gear pumps and piping should be 316 stainless steel. Recommended storage for bulk tanks is 26-37 °C (80-100 °F).
- Handle G-3300 with care; use away from sparks and open flame. Use in a well ventilated area. Contact with eyes, nose, and prolonged contact with skin should be avoided. Use gloves and safety goggles when handling G-3300.
- It is recommended that G-3300 be stored in sealed containers at temperatures below 32 °C (90 °F). Avoid overheating or freezing. If material is frozen, mild heat and agitation are recommended to ensure the material is homogeneous before use.