Products

MAKON® DA-6 is a high-active nonionic surfactant that excels in emulsification, moderate foam generation, detergency, and excellent wetting properties. It has a broad spectrum of applications, including laundry, textiles, hard surface cleaning, paints, carpet cleaning, hand dishwashing, and institutional and industrial cleaning formulations. Importantly, makon da-6 aligns with the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

STEPCOTE® W-846 stands out as an exceptional wetting agent ideally suited for waterborne coatings. Its versatile application encompasses both the letdown phase of production and post-formulation addition. While its primary function revolves around enhancing wetting properties, its potential impact extends to multiple essential coating attributes. These include gloss improvement, mitigating foam formation, bolstering temperature stability, enhancing color acceptance, and optimizing hiding characteristics.

MAKON® P105 is a nonionic eo/po block copolymer that exhibits good oil-in-water emulsification properties. It can be used in a variety of markets, including agriculture, industrial, and paints and coatings. Applications for best fit are agricultural pesticide formulations, dispersants, emulsifiers, and industrial cleaning.

STEPCOTE® W-700 is another potent wetting agent tailored for waterborne coatings. It can be incorporated during the letdown phase of production or after final formulation. Despite its core function as a wetting agent, it possesses the potential to positively affect properties such as low foaming, color acceptance, and washability.

STEPCOTE® W-133 proves to be an efficient wetting agent suited for waterborne coatings. Its integration can occur during the letdown phase of production or post-formulation. While its primary role is enhancing wetting properties, it holds the potential to favorably impact numerous critical coating attributes, including gloss, temperature stability, color acceptance, wet scrub resistance, hiding, and washability.

STEPCOTE® W-125 serves as a highly effective wetting agent suitable for utilization in waterborne coatings. It can be integrated either during the letdown phase of production or added after the final formulation. While its primary role is as a wetting agent, it might also exert a positive influence on various coating properties such as gloss, low foaming, and color acceptance.

STEPCOTE® W-811 is a potent wetting agent specially designed for waterborne coatings. It offers versatility in its application, capable of being incorporated either during the letdown phase of production or added after the final formulation. While its core function lies in being a wetting agent, it has the potential to contribute positively to various essential coating properties, including gloss, color acceptance, wet scrub resistance, and hiding.

STEPCOTE® W-821 serves as a high-performing wetting agent tailored for waterborne coatings. Its utility spans both the letdown phase of production and post-final formulation addition. While its primary role centers on wetting enhancement, it also holds the potential to impart favorable effects on crucial coating properties, encompassing gloss, color acceptance, wet scrub resistance, and hiding.

STEPCOTE® W-722 excels as a potent wetting agent designed for waterborne coatings. Its integration can occur during the letdown phase of production or as an addition after the final formulation. While its primary function revolves around optimizing wetting properties, its beneficial effects extend to several pivotal coating attributes. These encompass gloss enhancement, mitigating foam formation, bolstering temperature stability, augmenting color acceptance, improving wet scrub resistance, promoting hiding characteristics, and enhancing washability.

STEPSPERSE® 250 is a nonionic polymeric dispersant used for dispersing carbon black in waterborne systems. No wetting agents are necessary. Typical loading levels are 4-8% solids on the weight of pigment (mass of dispersant used/mass of pigment used x 100%). A ladder study is advised to determine optimal dosage levels.

STEPSPERSE® 160S is an anionic polymeric dispersant suitable for dispersing phthalo blue pigment systems in waterborne applications. No wetting agents are necessary. Typical loading levels are 10–15% solids on the weight of pigment (mass of dispersant used x mass of pigment used x 100%). A ladder study is advised to determine optimal dosage levels.

STEPCOTE® W-805 excels as a potent wetting agent designed for waterborne coatings. Its integration can occur during the letdown phase of production or as an addition after the final formulation. While its primary function revolves around optimizing wetting properties, its beneficial effects extend to several pivotal coating attributes. These encompass gloss enhancement, mitigating foam formation, bolstering temperature stability, augmenting color acceptance, improving wet scrub resistance, promoting hiding characteristics, and enhancing washability.

G-3300 operates as an anionic surfactant with versatile applications. It is employed as a pigment dispersant in both water- and oil-based paints. Additionally, it serves as an effective wetting agent suitable for waterborne coatings. Its integration can take place during the letdown phase of production or through post-addition to the final formulation. The potential positive effects encompass gloss enhancement, improved color acceptance, and enhanced washability.

STEPCOTE® W-119 is an effective wetting agent for use in waterborne coatings. It can be incorporated during the letdown phase of production or added after the final formulation. Although it is primarily a wetting agent, it may positively impact the following coating properties: gloss, low foaming, color acceptance, hiding, and washability.

STEPSPERSE® 163P is an anionic polymeric dispersant suitable for iron oxide pigments in waterborne applications. No wetting agents are necessary. Typical loading levels are 2–4% solids on the weight of pigment (mass of dispersant used/mass of pigment used x 100%). A ladder study is advised to determine optimal dosage levels.

STEPCOTE® W-888 emerges as a highly efficient wetting agent tailored for waterborne coatings. Its inclusion can occur during the letdown phase of production or as an addition after the final formulation. While its core role centers on optimizing wetting characteristics, it is also capable of exerting favorable effects on a range of critical coating properties. These encompass gloss enhancement, augmenting color acceptance, improving wet scrub resistance, promoting hiding characteristics, and bolstering corrosion resistance.

STEPCOTE® W-843 proves its efficacy as a highly capable wetting agent tailor-made for waterborne coatings. Its integration is versatile, being applicable both during the letdown phase of production and as an addition after final formulation. While its central role revolves around enhancing wetting characteristics, it carries the potential to exert a favorable influence on critical coating attributes. These encompass gloss enhancement, bolstering high-temperature block resistance, augmenting color acceptance, and contributing to the effective hiding of the coating.

STEPCOTE® W-877 proves its worth as an effective wetting agent engineered for waterborne coatings. Its inclusion can take place during the letdown phase of production or as an addition after final formulation. While its core role is enhancing wetting characteristics, it holds the potential to positively impact significant coating attributes, including gloss enhancement, bolstering high-temperature block resistance, optimizing color acceptance, augmenting wet scrub resistance, and improving hiding characteristics.

ZELEC® A130 can be used as a wetting agent in the paint and coating industries. In this application, it could also contribute to the improvement of corrosion resistance, gloss, color acceptance, wet scrub resistance, and the hiding power of the film. It can also be used as an antistatic agent in textile and leather finishing and processing and in rubber, plastic, and composite processing. It can also act as an emulsifier and corrosion inhibitor in metalworking fluid, printing pressrooms, and oil fields. It can also be used as a demolding agent in a construction area and in rubber, plastic, or composite processing. It also has lubrication properties for metalworking fluids and textile and leather finishing and processing, including extreme-pressure and anti-wear properties.

STEPCOTE® W-849 stands as a formidable wetting agent designed for waterborne coatings. Its incorporation can happen during the letdown phase of production or after final formulation. Despite its primary role being a wetting agent, its influence extends positively to crucial coating properties such as gloss, color acceptance, wet scrub resistance, hiding, corrosion resistance, and washability.

STEPCOTE® W-839 stands as a powerful wetting agent meticulously designed for waterborne coatings. Its applicability extends to both the letdown phase of production and post-final formulation integration. While its core function revolves around optimizing wetting, it holds the potential to significantly influence key coating attributes, including gloss, high-temperature block resistance, color acceptance, and hiding properties.

STEPCOTE® W-806 excels as a potent wetting agent designed for waterborne coatings. Its integration can occur during the letdown phase of production or as an addition after the final formulation. While its primary function revolves around optimizing wetting properties, its beneficial effects extend to several pivotal coating attributes. These encompass gloss enhancement, mitigating foam formation, bolstering temperature stability, augmenting color acceptance, improving wet scrub resistance, promoting hiding characteristics, and enhancing washability.