Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- Fluids & Lubricants Functions
- CAS No.
- 9046-01-9
- EC No.
- 618-558-4
- Technologies
Features & Benefits
- Fluids & Lubricants Features
- Product Benefits
- Imparts excellent corrosion inhibition, especially for aluminum metal.
- Alternative anionic emulsifier to heavy sulfonates for providing antiwear properties
STEPAN® MWA Products Product Class Functional Characteristics Emulsification Lubricity Antifoaming Metal Cleaning Hard Water Tolerance Antimisting Corrosion Inhibition Coupling Agent 300 Series Phoshate X X X X
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Applications
STEPAN MWA-395 is a phosphate ester and can be used as an emulsifier and extreme pressure agent in synthetic and semi-synthetic metalworking fluids. It can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers. STEPAN MWA-395 is soluble in water and slightly soluble in oil, yielding very low surface tension and CMC values. Phosphate esters have shown corrosion control for ferrous and non-ferrous metals.
Properties
- Physical Form
- Appearance
- Hazy liquid (at 25°C)
- Dispersible in
- Water
- Soluble in
- Kerosene, Methanol, Xylene
- Typical Properties
Value | Units | Test Method / Conditions | |
Average Number of Moles (Ethylene oxide) | 3 | — | — |
Density (at 25°C) | 1.03 | g/ml | — |
Diester | 53 | % | — |
Flash Point | min. 94 | °C | PMCC Flash Point Tester |
H₃PO₄ | max. 2 | % | — |
Moisture Content | max. 1 | % | — |
Monoester | 42 | % | — |
pH (in 1% aqueous) | 2.5 | — | — |
Pour Point | max. -18 | °C | — |
Regulated Volatile Organic Chemicals | 0 | % | U.S. EPA |
Viscosity (at 25°C) | 760 | cPs | — |
Regulatory & Compliance
- Chemical Inventories
- Clearances
The international inventories (country clearances) for STEPAN MWA-395 can be found in Section 15 of the Safety Data Sheet (SDS). It is the responsibility of the formulator to review the chemical control regulations for each country where the end-product is intended to be sold or used.
Packaging & Availability
- Packaging Type
- Standard Packaging
STEPAN MWA-395 is available in drums.
Storage & Handling
- Storage & Handling
- Safety precautions (gloves and safety goggles-face shield, if splashing may occur) should be employed when handling STEPAN MWA-395. Avoid contact with the eyes and skin. Wash thoroughly after handling material. See SDS for more information.
- Bulk Storage Information: Elevated storage temperature may be desirable to maintain ease of pumping, but product should be stored long term at ambient temperature.
- Non-Bulk Storage Information: STEPAN MWA-395 which has been stored in drums at temperatures below 50 °F (10 °C) may thicken or solidify. They may be fluidized by warming with a drum heater or in a steam room.Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 130 °F (54 °C) are not recommended.