Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- INCI Name
- Product Type
- Agrochemical Functions
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- CAS No.
- 151-21-3
- EC No.
- 205-788-1
- Technologies
- Product Families
- Chemical Formula
CH3 (CH2)10 CH2 OSO3 Na
Features & Benefits
- Benefit Claims
- Agrochemicals Features
- HII Features
- Biodegradability
Product is readily biodegradable.
- Product Benefits
- Preservative Free
- Naturally derived
- Compatible with hypochlorite bleach
Applications & Uses
- Applications
- Bath & Shower Applications
- Hair Care Applications
- Home Care Applications
- I&I Cleaning Applications
- Personal Hygiene Applications
- Skin Care Applications
- Applications
STEPANOL WA-EXTRA HP can be used in a wide variety of personal care and detergent applications in which copious amounts of foam and excellent viscosity building properties are desired. Because of its high purity, STEPANOL WA-EXTRA HP can be used for formulations that are sensitive to levels of inorganic salts and free oil. It can be incorporated into shampoos, handsoaps, bath products, shaving creams and medicated ointments. STEPANOL WA-EXTRA HP can also be used in rug shampoos, light duty liquid detergents and fine fabric wash. STEPANOL WA-EXTRA HP is preserved by excess alkalinity which allows the formulator flexibility when choosing a preservative for their finished formulation.
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear to pale yellow liquid (at 25°C)
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Actives Content (EW 302) | 30 | % | — |
| Boiling Point | min. 100 | °C | — |
| Color (Transmittance at 420 nm) | 94 | % | — |
| Density | 1.04 | g/ml | — |
| Excell NaOH | 0.1 | — | — |
| Flash Point | min. 94 | °C | PMCC Flash Point Tester |
| Freeze Point | 8 | °C | — |
| pH (in 10% aqueous) | 11.3 | — | — |
| Pour Point | 13 | °C | — |
| Regulated Volatile Organic Chemicals | 0 | % | U.S. EPA |
| Sodium Chloride | 0.05 | % | — |
| Sodium Sulfate | 0.05 | % | — |
| Unsulfated Alcohol | 0.3 | % | — |
| Viscosity (at 25°C) | 200 | cPs | — |
| Viscosity (at 60 °C) | 10 | cPs | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
- All components of STEPANOL WA-EXTRA HP are listed in the following countries; the registration numbers for the active ingredients are included in parentheses: Europe (EINECS 205-788-1), Japan (ENCS 2-1679), Canada (DSL 151-21-3), Australia (AICS 151-21-3), United States (TSCA 151-21-5), Philippines (PICCS 151-21-3), Korea (ECL Serial No. KE-21884) and China (IECSC 151-21-3).
- STEPANOL WA-EXTRA HP is available as Kosher Certified.
Safety & Health
- Health Effects
STEPANOL WA-EXTRA HP is slightly toxic orally in rats (LD₅₀ is between 1,000 to 2,000 mg/kg bw) and may cause severe skin and eye irritation at 10% active.
Packaging & Availability
- Standard Packaging
STEPANOL WA-EXTRA HP is available in bulk and 55 gallon drums (net weight 450 lb/204 kg).
Storage & Handling
- Storage & Handling
- Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling STEPANOL WA-EXTRA HP. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling material.
- It is recommended that STEPANOL WA-EXTRA HP be stored in sealed containers and kept at temperatures between 85 °F (29 °C) and 110 °F (43.3 °C). Avoid overheating or freezing. If material is frozen, mild heat and agitation are recommended to ensure the material is homogeneous before use.
- Bulk Storage Information: Material of construction: 304 stainless steel or 316 (or fiberglass with isophthalic resin, or HDPE). Gear pumps and piping should be 316 stainless steel. Recommended temperature for storage is 85-100 °F (29-43.3 °C). Optimum temperature would be between 85-90 °F. Max Temp is 120 °F (48.9 °C). Any hot water that is used to heat storage tanks, or trace heating elements should not exceed a temperature of 120 °F (48.9 °C).
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.