Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- Product Type
- Cleaning Ingredients Functions
- CAS No.
- 7173-51-5
- EC No.
- 230-525-2
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- HII Features
- Biodegradability
STEPANQUAT products are biodegradable.
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
STEPANQUAT 1010 products may provide cationic surfactant, dispersant or emulsifier properties in formulation. STEPANQUAT 1010 products may be considered for use as or in:
- Emulsion breakers (to de-stabilize emulsions stabilized by anionics)
- Used to make hydrophobized clays, and may hydrophobize other surfaces with negative charges (e.g. sand)
- Specialty emulsifiers
- Solids wetter and wax dispersants
Properties
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Typical Properties
- Composition
| Value | Units | Test Method / Conditions | |
| Color | max. 130 | — | Apha Scale |
| Density | 0.91 | g/ml | — |
| pH (10% in aqueous solution) | 7.2 | — | — |
| Free Amine and Amine Hydrochloride | max. 1.5 | % | — |
| Pour Point | 9 | °C | — |
| Viscosity (at 25°C) | 20 | cPs | — |
| Flash Point | 36 | °C | PMCC Flash Point Tester |
| Regulated Volatile Organic Chemicals (Ethanol) | 10 - 12 | % | U.S. EPA |
| Value | Units | Test Method / Conditions | |
| Didecyl Dimethyl Ammonium Chloride | 50 | % | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
- All components of STEPANQUAT 1010 quaternaries are on the following country inventories; United States (TSCA 7173-51-5), Japan (ENCS 9-1971) and (ISHL (9)-1971), Canada (DSL 7173-51-5), Australia (AICS 7173- 51-5), Korea (ECL Serial No. KE-10281), Philippines (PICCS 7173-51-5) and China (IECSC 7173-51-5). It is the responsibility of the end user to review the chemical control regulations for each country. It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
- The STEPANQUAT 1010 series is available as Kosher Certified.
Safety & Health
- Health Effects
STEPANQUAT 1010 products are moderately toxic orally (LD50 = 50-500 mg/kg) and corrosive to skin and eyes at 50% active.
Packaging & Availability
- Standard Packaging
STEPANQUAT products are available in 55 gallon drums (425 lb, 193 kg for STEPANQUAT 1010; 400 lb, 182 kg for STEPANQUAT 1010-80%) and in bulk quantities.
Storage & Handling
- Storage & Handling
Handle liquid STEPANQUAT products with care; use away from sparks and open flame. Use in well ventilated area. Avoid contact with eyes, nose or prolonged skin contact. Gloves, protective clothing, safety goggles and face shield should be worn when handling STEPANQUAT products. Wash thoroughly after handling products. It is recommended that STEPANQUAT products be stored in sealed containers in a cool, dry place. If material is frozen, it should be heated gently and stirred to ensure it is homogeneous before use.
Bulk Storage Information
STEPANQUAT quaternaries can be stored in vessels of 316 stainless steel or fiberglass with a corrosion liner. Contact between quaternaries and anionic materials must be avoided. At use dilution, STEPANQUAT quaternaries are non-corrosive to most plastics, natural rubber, stainless steel, monel metal, iron, brass, aluminum, lead and tin; however, BTC quaternaries as supplied, may be corrosive to the materials listed above. Liquid STEPANQUAT products should be stored between 85 - 120 °F (29 - 49 °C). An internal hairpin coil of 316 stainless steel with low pressure steam (under 50 psig) should be used if heating is required. Mild agitation is recommended while storing to maintain homogeneity. Pumps, pipes and transfer lines should be 316 stainless steel. Rubber hoses with Teflon cross-linked polyethylene with 316 stainless steel fittings are recommended for loading and unloading.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Exposure Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.