Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- CAS No.
- 69029-43-2
- EC No.
- 614-905-9
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Coating Type
- Applications
STEPCOTE W-805 is an effective wetting agent for use in waterborne coatings. It can be incorporated during the letdown phase of production or post added to the final formulation. This product is low active, solid content should be considered when formulating. Typical use level, based on active content, is 2 – 6 lbs/100 gallons, however, optimal dosing should be determined by performing a ladder study. STEPCOTE W-805, although primarily a wetting agent, may positively impact the following coatings properties:
- Gloss
- Low Foaming
- Temperature Stability
- Color Acceptance
- Wet Scrub Resistance
- Hiding
- Washability
Properties
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Actives Content | 25 | % | — |
| Color | max. 3 | — | Gardener Scale |
| Critical Micelle Concentration (CMC) | 6 | mg/l | — |
| Density (at 25°C) | 0.99 | g/ml | — |
| Flash Point | min. 94 | °C | PMCC Flash Point Tester |
| Freeze Point | 2 | °C | — |
| pH (in 10% aqueous) | 7 | — | — |
| Regulated Volatile Organic Chemicals | 0 | % | U.S. EPA |
| Surface Tension (at Critical Micelle Concentration) | 35 | dynes/cm | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
The international inventories (country clearances) of STEPCOTE W-805 can be found in Section 15 of the Safety Data Sheet (SDS). It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Packaging & Availability
- Packaging Type
- Standard Packaging
STEPCOTE W-805 is available in bulk quantities.
Storage & Handling
- Shelf Life
- 12 Months
- Storage & Handling
- Storage Recommendations: STEPCOTE W-805 should be stored in closed containers and kept in a cool, dry place away from incompatible materials (see Section 10 of the SDS). An elevated storage temperature may be desirable to maintain ease of pumping, however product should be stored long-term at ambient temperatures. Stepan’s recommended re-test for this product is 1 year (12 months) from the date of manufacture. After 1 year (12 months), we recommend the customer re-analyze to assure product is within specification.
- Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling STEPCOTE W-805. Contact with eyes, nose or prolonged contact with skin should be avoided. Wash thoroughly after handling STEPCOTE W-805.