Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Biodegradability
Based on available component data, AGENT 3241-001 is expected to be readily biodegradable.
Applications & Uses
- Markets
- Coating Type
- Applications
STEPCOTE™ W-877 is an effective wetting agent for use in waterborne coatings. It can be incorporated during the letdown phase of production or post added to the final formulation. Typical use level, based on active content, is 2 – 6 lbs/100 gallons, however, optimal dosing should be determined by performing a ladder study. STEPCOTE™ W-877, although primarily a wetting agent, may positively impact the following coatings properties:
- Gloss
- High Temperature Block Resistance
- Color Acceptance
- Wet Scrub
- Hiding
Properties
- Physical Form
- Appearance
- Clear liquid (at 40°C)
- Typical Properties
Value | Units | Test Method / Conditions | |
Density (at 25°C) | 1.09 | g/ml | — |
Flash Point | min. 94 | °C | PMCC Flash Point Tester |
pH (in 15% aqueous) | 7.5 | — | — |
Solids Content | 40 | % | — |
Regulatory & Compliance
- Chemical Inventories
- Clearances
The international inventories (country clearances) of STEPCOTE W-877 can be found in Section 15 of the Safety Data Sheet (SDS). It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Safety & Health
- Health Effects
Based on available component data, AGENT 3241-001 is expected to be slightly toxic orally (LD₅₀ > 2000 mg/kg) and moderately to severely irritating to both skin and eyes.
Packaging & Availability
- Packaging Type
- Standard Packaging
STEPCOTE™ W-877 is available in bulk quantities.
Storage & Handling
- Storage & Handling
- Normal safety precautions (e.g., gloves and safety goggles) should be employed when handling STEPCOTE W-877. STEPCOTE W-877 is severely irritating to eyes and skin, contact with eyes and skin should be avoided.
- Storage Recommendations: STEPCOTE W-877 should be stored in closed containers and kept in a cool, dry place.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures. See SDS for more information.