Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Cleaning Ingredients Functions
- CAS No.
- 51811-79-1
- EC No.
- 610-741-7
- Product Families
Features & Benefits
- Biodegradability
STEPFAC products are biodegradable.
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Industrial Additives End Use
- Applications
STEPFAC 8170 is used in high electrolyte systems. It can be used as a compatibility agent in liquid fertilizer systems and can also be incorporated into many emulsifier blends.
Properties
- Physical Form
- Appearance
- Clear amber liquid
- Soluble in
- Water, Methanol, Xylene
- Insoluble in
- Kerosene
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 25 °C) | 1.12 | g/ml | — |
| Diester | 45 | % | — |
| pH (in 1% Aqueous) | 2 | — | — |
| Viscosity (at 25°C) | 3070 | cPs | — |
| Flash Point | min. 94 | °C | — |
| Moisture Content | 0.2 | % | — |
| Acid Number (pH 5.2) | 67 | — | — |
| Acid Number (pH 9.5) | 118 | — | — |
| Monoester Content | 50 | % | — |
| H3PO4 Content | max. 3.0 | % | — |
| Pour Point | -2 | °C | — |
| Moles of EO Average | 10 | — | — |
| Regulated Volatile Organic Chemicals (Ethanol) | 0 | % | U.S. EPA |
Regulatory & Compliance
- Chemical Inventories
- Clearances
The active ingredient for this STEPFAC series is listed in the following countries with the Inventory Registration Number included in parentheses: United States (TSCA 51811-79-1), Canada (DSL 51811-79-1), Europe (Polymer), Korea (ECL Serial No. KE-26248), Japan (ENCS 2-2008), Australia (AICS 51811-79-1), Philippines (PICCS 51811-79-1), China (IECSC 51811-79-1), New Zealand (NZIoC 51811-79-1). STEPFAC 8170 is approved for use under U.S. EPA 40 CFR 180.910, pre- and post-harvest applications, and 180.930. It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Safety & Health
- Health Effects
STEPFAC products are slightly toxic orally (LD₅₀ >1300 mg/kg b.w.) and are severely irritating to skin and eyes.
- DOT Classification
Non Hazardous.
Packaging & Availability
- Standard Packaging
STEPFAC 8170 is available in drums (480 lb, 218 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
Normal safety precautions, (i.e., gloves and safety goggles) should be employed when handling STEPFAC 8170. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling material.
Bulk Storage Information
Elevated storage temperature may be desirable to maintain ease of pumping, but product should be stored at ambient temperature. STEPFAC 8170 which have been stored in drums at temperatures below 30°F (-1°C) may thicken or solidify. They may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 130°F (54°C) are not recommended.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.