Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Reinforcement Form
- Reinforcement Material
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Composites End Use
- Composites Processing Methods
- Use
This continuous filament mat is designed for reinforcing laminates. This mat is characterized as having fast wet-through, good wet-out, moderate conformability, good surface smoothness and very high mat tensile strength.
Properties
Regulatory & Compliance
- Chemical Inventories
Technical Details & Test Data
- Available Products
Weight Trimmed Width Available Standard Weights* Available Standard Widths* Oz./Sq. Ft. G/m² Inches Centimeters 1 300 50 127 *All combination of non-standard weights and widths including any combinations not reflected in this table may be available only with prior approval of the product engineer.
- Product Acceptance Limits & Test Methods
WEIGHT - Values stated are based on 12" x 12" or 30.48 cm x 30.48 cm test specimens.
Weight Per Square Foot (Ounces) Nominal Individual (Grams) Calculated Weight Per Square Meter (Grams) Test Method 1 28.4 305.7 W-01Fc EDGE WEIGHT - Values stated are based on 2” x 12” or 5.08 cm x 30.48 cm test specimens.
Weight Per Square Foot (Ounces) Approximate Weight Per Square Meter (Grams) Nominal Individual (Grams) Test Method 1 305.7 4.8 W-01-Fg-T IGNITION LOSS (%)
Weight Minimum Individual Maximum Individual Test Method All 2.25 6.75 W-05-Ec-T TENSILE - Values stated are based on 3" x 12" or 7.62 cm x 30.48 cm test specimens.
Weight Per Square Foot (Ounces) Minimum Individual (Pounds) Nominal Maximum Individual (Pounds) Test Method 1 20 85 140 S-01-AG-T WIDTH:
Weight Per Square Inches (Ounces) Nominal (Inches) Test Method All As specified on the order D-03Aa - Preparation for Shipment
ROLL-UP & TELESCOPING REQUIREMENTS
The mat is wound on a 4" (10.2 cm) inside diameter paper tube, having a single tube
- with a length the same as the mat width with the following tolerances:
- For rolls 68” (172.7 cm) and greater, the tube length tolerances are plus 0",minus 1/2" (-1.27 cm)
- For rolls less than 68” (172.7 cm), the tube length tolerances are plus 0”,minus 1” (-2.54 cm)
*The mat will be so wound that the maximum length of mat telescoping will not exceed
1/4” (0.64 cm). Telescoping is described as the condion where successive wraps of mat are not perfectly aligned one upon the other, bringing about a concave effect on one end of the roll and a convex effect on the other.
No tube will protrude past the product.ROLL DIAMETER
All full rolls are manufactured to a diameter range of 19" (48.26 cm) to 22" (55.88 cm).
Note: A maximum of one (1) roll per pallet may be under 19" (48.26 cm), but not less than 9" (22.86 cm).Weight Per Square Foot (Ounces) Approximate Weight Per Square Meter (Grams) Approximate Full Weight (Pounds) Approximate Full Weight (Kilograms) Approximate Full Roll Length (Meters) Approximate Full Roll Length (Feet)
1 305.7 3.61*inches of mat width 0.646*cm of mat width 211.2 693 CONTINUOUS LENGTH ROLLS
rolls will be continuous, one-piece lengths with no wrap-ins permitied.
Packaging & Availability
- Packaging Type
- Standard Packing Method
Product Identification
Cores will be printed on the inside to identify type, ounces, and tracking.
A content label will adequately identify each roll.
WRAPPING
The rolls are wrapped in polyethylene.
PACKAGING
The rolls are multiple packed, twelve (individual or common) rolls for widths less than or
equal to 42” (106.68 cm) or six (individual or common) rolls for other widths up to 84”
(213.36 cm), on a 66” (167.64 cm) x 44” (111.76 cm) varying height pallet. Greater than
84” (213.36 cm) are on a 116” (294.6 cm) x 44” (111.76 cm) varying height pallet. Also,
may be heat treated or block.
PALLETIZATION
The rolls of mat will be palletized with pallet stretch packaging.