TİSESTER F 30D03 F01 K02 HS R01

Identification & Functionality

Chemical Family

Polyesters

Fillers Included

Glass Fiber

Polymer Name

Polybutylene Terephthalate (PBT)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyesters & Copolyesters

Features & Benefits

Labeling Claims

Natural

Materials Features

Chemical Resistant,

Creep Resistant,

Dimensional Stability,

Excellent Mechanical Strength,

Excellent Stiffness,

Flame Retardant,

Good Environmental Stress Crack Resistance (ESCR),

Good Flow,

Good Mechanical Properties,

Good Sliding Properties,

Good Surface Finish,

Good Thermal Stability,

Halogenated,

High Fatigue Resistance,

High Hardness,

Low Friction,

Low Water Absorption,

Wear Resistant

Applications & Uses

Markets

Automotive & Transportation,

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Industrial

Applications

Automotive & Transportation — Automotive

Exterior & Body,

Fuel Systems,

Interior,

Other Automotive Applications,

Powertrain & UTH

Automotive & Transportation — Other Automotive & Transportation Applications

Building & Construction — Other Building & Construction Applications

Consumer Goods — Other Consumer Goods Applications

Electrical & Electronics — Other Electrical & Electronics Applications

Industrial — Other Industrial Applications

Plastics & Elastomers End Uses

Automotive Applications,

Automotive Exterior Parts,

Automotive Interior Parts

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Flame Rating

UL 94 V0,

UL 94 V2

Physical Form

Pellets,

Solid

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress at Break at +23°C	110-130	MPa	ISO 527-2
Tensile Modulus at +23°C	9000-11000	MPa	ISO 527-2
Izod Impact Strength, Notched (+23°C)	9-10	kJm2	ISO 180/A
Tensile Strain at Break (+23°C)	2-3	%	ISO 527-2

Thermal Properties

	Value	Units	Test Method / Conditions
Vicat Softening Temperature (50 N)	210	°C	ISO 306
Heat Deflection Temperature (0,45 Mpa)	220	°C	ISO 75
Heat Deflection Temperature (1,80 Mpa)	205	°C	ISO 75
Melting Temperature (10 K/Min)	225	°C	ISO 11357

Typical Properties

	Value	Units	Test Method / Conditions
Density	1.63-1.66	g/cm3	ISO 1183
Moisture Content	max. 0.1	%	ISO 15512
Molding Shrinkage (Normal)	1	%	ISO 294-4
Molding Shrinkage (Parallel)	0.3	%	ISO 294-4

Electrical Properties

	Value	Units	Test Method / Conditions
Comparative Tracking Index (Solution A)	225	Volt	ISO 60112
Volume Resistivity	10000000000000000	Ohm.cm	IEC 60093
Surface Resistivity	1.00E+14	Ohm	IEC 60093

Flammability

	Value	Units	Test Method / Conditions
Flame Rating (0,75 mm)	V2	-	UL 94
Flame Rating (1,6 mm)	V0	-	UL 94
Glow Wire Flammability Index (2 mm)	960	°C	IEC 60695

Processing Information (Injection Molding)

	Value	Units	Test Method / Conditions
Predrying Temperature	100-120	°C	—
Predrying Time	4-8	hours	—
Melting Temperature	250-270	°C	—
Nozzle Temperature	240-260	°C	—
Pre-3 Region Temperature	240-260	°C	—
Mid-2 Region Temperature	230-250	°C	—
Aft-1 Region Temperature	230-240	°C	—
Mold Temperature	80-100	°C	—
Hold Pressure	40-80	MPa	—

Regulatory & Compliance

Certifications & Compliance

Directive 2011/65/EC amended through EU/2015/863 (RoHS),

RoHS Compliant,

UL 94

Packaging & Availability

Packaging Type

Bags