Products

Toray Toray Cetex® TC930 is a thermoplastic composite using a high density polyethylene (HDPE) matrix. This product is commonly used in pipe overwrapping Applicationss because of its high hoop strength, low modulus, and excellent chemical resistance. Toray Cetex® TC930 is available in a pigmented glass-reinforced tape. Indefinite at 25°C (77°F).

Toray BT250E-1 resin system is a 121°C (250°F) cure epoxy prepreg system with excellent toughness and strength. It provides an outstanding surface finish under vacuum-bag/oven-cure only. The resin system, which is self-adhesive to honeycomb and foam core, is MIL-R-9300 qualified and makes a great choice for many Applicationss in the low-tomedium-service temperature range.

Toray E721-FR is a modified epoxy resin system of medium viscosity for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass, and aramid. Toray E721-FR offers excellent structural properties, flame retardancy, and exceptional toughness allowing direct lamination to honeycomb without the use of resin film. Toray E721-FR is designed for structural Applicationss in the motor racing, marine industries, and for a wide range of engineering Applicationss. If fire-retardant properties are not required, consult separate data sheet for Toray E720.

Toray Toray AmberTool® HX32-1 New is an epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 140°C (284°F) is achieved. Toray AmberTool® HX32-1 prepreg is ideal for large tooling Applicationss. 65–80°C (149–176°F) Curing Epoxy Tooling Prepreg.

Toray Toray AmberTool® HX56 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 180°C (356°F) is achieved. Toray AmberTool® HX56 achieves an excellent surface finish for small to medium sized autoclave tooling.

8020 Rapi-Ply is a Outstanding vacuum-bag-only (out-of-autoclave) processing capability. No debulking required off Bi-layer form facilitates fast lay-up

Toray E732 is a snap cure toughened epoxy resin matrix optimized for press curing (compression molding) prepreg Applicationss. With a cure time of 4 minutes at 160°C (320°F), an onset Tg of 170°C (338°F) is achieved. At this higher temperature, medium-to-high production rates can be accomplished, with customers able to produce beyond 50,000 parts per year. Toray E732 is a versatile matrix with a range of processing options allowing a variety of automotive and industrial Applicationss to be realized.

Toray 8020-FR is a modified epoxy resin system suitable for curing between 70°C (158°F) and 120°C (248°F). The medium viscosity resin is pre impregnated into high performance fibers such as carbon, glass and aramid. Toray 8020-FR offers excellent structural properties, flame retardance and toughness. Toray 8020-FR is designed for structural Applicationss in the motor racing, general industrial fabrications and marine industries and is suitable for a wide range of engineering Applicationss.

Toray 8020 is a new generation of toughened epoxy resin systems offering a balance of mechanical properties and excellent surface finish. The resin system has been developed to offer a long out life and flexible cure schedules and can be applied to a wide range of high performance fibers. Toray 8020 is compatible for co-cure with Toray’s resin film, Toray 8020, and Toray’s syntactic core, Toray MicroPly™ SC8020A.

Toray RS-1 is an epoxy prepreg resin that provides an excellent balance of mechanical properties, toughness, and modulus. RS-1 has been evaluated and qualified in areas ranging from marine to aerospace and dielectric structures. RS-1 is also available in a lower temperature curing formulation 80°C (176°F).

Toray E650 is a low temperature curing toughened resin system pre-impregnated into high performance fibers such as carbon, glass and aramid. It is designed for the production of composite structures in the leisure and sporting industries and also for a range of engineering Applicationss. Toray E650 is compatible for co-cure with Toray’s low temperature cure resin film, Toray EF44, and Toray’s low temperature cure syntactic core, Toray MicroPly™ LT64.

Toray Toray AmberTool® HXR56 New is a low temperature curing epoxy composite tooling prepreg, fully impregnated into a carbon multiaxial backing ply construction. This two-layer product facilitates 3-D construction while allowing efficient lay-up, reducing overall tooling costs. HXR56 prepreg is co-compatible with our heritage AmberTool® HX56 carbon 205gsm 2x2 twill reinforcement surface ply. After a suitable post cure, an end use temperature of 180°C (356°F) is achieved. 40–55°C (104–131°F) Low Temperature Curing Epoxy Tooling Prepreg.