Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
It preserves the chemical and electrical properties from the temperature range of -180ºC to 260ºC. It is non-flammable. In the electrical and electronic industries it has a very wide field of application due to its exceptional electrical and dielectric properties, which remain constant within a wide range of frequencies and temperatures. It is a self-lubricating material that can be further improved by adding fillers such as graphite, bronze, stainless steel, fiberglass, etc. Its tensile strength is moderate. It is flexible, but not elastic (the smaller the section, the greater the flexibility and vice versa).
Applications & Uses
- Applications
- Composites End Use
- Plastics & Elastomers End Uses
- Industry Applications
- Excellent machining.
- Non-flammable
- High elongation before breakage (>300%).
- Excellent resistance to continuous service temperature up to 260ºC.
- Satisfactory low temperature resistance as low as -200ºC.
- Excellent chemical resistance
- Excellent electrical insulation
- Excellent slide and wear properties
- Inherent flame retardant
Properties
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Miscellaneous Properties
| Value | Units | Test Method / Conditions | |
| Tensile strength | 22.0 | MPa | ASTM D 4894 |
| Elongation at Break | min. 200 | % | ASTM D 4894 |
| Compression Strength (1%) | 5.0 | MPa | ASTM D 695 |
| Ball Indentation Hardness | min. 23 | MPa | ISO 13000-2 |
| Value | Units | Test Method / Conditions | |
| Glass Transition Temperature | -20.0 | ºC | DIN 53765 |
| Service Temperature (Short term) | 260.0 | ºC | — |
| Service Temperature (Long term) | 260.0 | ºC | — |
| Thermal Expansion (23 - 100 ºC long) | 13.0 | 10⁻⁵ K⁻¹ | ASTM C 177 |
| Thermal Conductivity | 0.2 | W / (k*m) | ASTM C 177 |
| Value | Units | Test Method / Conditions | |
| Density | 2.15 | g/cm³ | — |
| Value | Units | Test Method / Conditions | |
| Surface Resistance | 10¹⁶ | Ω | ASTM D 257 |
| Specific Volume Resistance | 10¹⁷ | Ω . cm | ASTM D 257 |
| Dielectric Constant (50 - 109 Hz) | 2.1 | — | ASTM D 150 |
| Dielectric Strength (In Air) | 80.0 | kV/mm | ASTM 149 |
| Value | Units | Test Method / Conditions | |
| Water Absorption (23ºC) | max. 0.01 | % | ASTM D 570 |
| Flammability (UL94) | V0 | — | DIN IEC 60995-11-10 |
Regulatory & Compliance
Packaging & Availability
- Availability
Bars, tubes, plates and film.