Products

TKG® ET (PET) is a relatively new semi-crystalline polymer created for technical uses. It is suitable for mechanical parts that require dimensional stability and a low coefficient of friction.

TKG® 300 (PE-HD) is a partially crystalline thermoplastic, its coefficient of friction and its ease of machining make this material one of the most used in any type of industry, especially the food industry, since it is valid for direct contact with food.

TKG® DF (PVDF) is a highly crystalline thermoplastic. It maintains its electrical, thermal and mechanical properties under a wide range of temperatures (-40°C to 150°C). It resists the outdoors very well, especially UV radiations and gamma rays.

TKG® FLON (PTFE) is chemically inert up to high temperatures and pressures, it is completely non-toxic and has unbeatable non-stick properties since its coefficient of friction is the lowest known among solids.

TKG® VINYL (PVC) is a polymerization product of vinyl chloride. There are several types of PVC that are distinguished by the value of their molecular weight and by the process of obtaining them.

TKG® AL (POM C) commonly known as Acetal, is a crystalline polymer obtained by polymerizing formaldehyde. Discovered only a few years ago, it has enjoyed a rapid growth in popularity because of its excellent mechanical characteristics, its stability in spite of humidity and for being easy to machine.

TKG® PP (PP) is the lightest of all thermoplastics, and its mechanical characteristics are superior to high-density polyethylene. Its main use is in the chemical industry, as it is resistant to alkalis and acids.

TRAIDAMID® G (PA6 C) is a cast nylon 6, the production method of this polyamide (polymerization of caprolactam directly in the mold) allows the production of parts larger than normal dimensions, such as large rings, very thick or blocks.

TKG® 500 (PE-HMW) is is a high-performance, high-molecular-weight extruded or pressed polyethylene. It is a partially crystalline thermoplastic, its coefficient of friction and its ease of machining make this material one of the most used in any type of industry, especially the food industry, since it is valid for direct contact with food.

TKG® Peek (Peek) is a thermoplastic that resists continuous operation up to 250ºC. If it is reinforced with fiberglass or carbon fiber, its tensile strength increases to very high values, which leads it to be used in applications previously reserved only for metals, since it behaves excellently under dynamic load conditions.

TRAIDAMID® E (PA6 E) is a semi-crystalline macromolecular thermoplastic obtained by the polymerization of caprolactam. The use of a high-viscosity polymer for extrusion allows a product with excellent mechanical characteristics to be obtained with a high degree of quality.

TKG® ETL (PET + SOLID LUBRICANT) is a relatively new semi-crystalline polymer created for technical uses. It is suitable for mechanical parts that require dimensional stability and a low coefficient of friction.

TKG® 1000 (PE-UHMW) is a high-performance, high-molecular-weight extruded or pressed polyethylene. It is a partially crystalline thermoplastic, its coefficient of friction and its ease of machining make this material one of the most used in any type of industry, especially the food industry, since it is valid for direct contact with food.