Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
At room temperature it resists practically any type of chemical attack and at temperatures close to 70ºC, very few chemical agents can attack it. It is a plastic with a high degree of recyclability, with very little impact on the environment. To achieve greater hardness or resistance to abrasion wear, it is reinforced with a fiberglass filler.
- Main Characteristics
- Good stability against temperature.
- Easy machining and low specific weight.
- High chemical resistance.
- High resistance to abrasion.
- Excellent electrical insulator.
- Minimal water absorption.
- Great resistant to dilute acids, solvents and cleaning agents
- Very tough
- Easily weldable
Applications & Uses
- Markets
- Applications
- Composites End Use
- Plastics & Elastomers End Uses
- Industry Applications
- Water treatment plants
- Food processing industry
- Drip pans
- Seals
- Ventilation ducts
Properties
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Miscellaneous Properties
| Value | Units | Test Method / Conditions | |
| Modulus of Elasticity (1 mm/min) | 2000.0 | MPa | DIN EN ISO 527-2 |
| Tensile strength (50 mm/min) | 33.0 | MPa | DIN EN ISO 527-2 |
| Tensile Strength at Yield (50 mm/min) | 33.0 | MPa | DIN EN ISO 527-2 |
| Elongation At Yield (50 mm/min) | 5.0 | % | DIN EN ISO 527-2 |
| Elongation at Break (50 mm/min) | 65.0 | % | DIN EN ISO 527-2 |
| Flexural Strength (2 mm/min , 10 N) | 54.0 | MPa | DIN EN ISO 178 |
| Modulus Of Elasticity (Flex Test, 2 mm/min , 10 N) | 1800.0 | MPa | DIN EN ISO 178 |
| Compression Strength (1%, 5 mm/min , 10 N) | 15.0 | MPa | EN ISO 604 |
| Compression Strength (2%, 5 mm/min , 10 N) | 26.0 | MPa | EN ISO 604 |
| Compression Modulus (5 mm/min , 10 N) | 1600.0 | MPa | EN ISO 604 |
| Impact Strength (Charpy, max. 7.5j) | 140.0 | Kj/m² | DIN EN ISO 179-1EU |
| Ball Indentation Hardness | 100.0 | MPa | ISO 2039-1 |
| Value | Units | Test Method / Conditions | |
| Glass Transition Temperature | -10.0 | ºC | DIN 53765 |
| Melting Temperature | 165.0 | ºC | DIN 53765 |
| Service Temperature (Short term) | 140.0 | ºC | - |
| Service Temperature (Long term) | 100.0 | ºC | - |
| Thermal Expansion (23 - 60 ºC long) | 13.0 | 10⁻⁵ K⁻¹ | DIN EN ISO 11359-1;2 |
| Thermal Expansion (23 - 100ºC long) | 14.0 | 10⁻⁵ K⁻¹ | DIN EN ISO 11359-1;2 |
| Value | Units | Test Method / Conditions | |
| Density | 0.92 | g/cm³ | - |
| Value | Units | Test Method / Conditions | |
| Water Absorption (24h, 23ºC) | 0.01 | % | DIN EN ISO 62 |
| Water Absorption (96h, 23ºC) | 0.02 | % | DIN EN ISO 62 |
| Resistance To Hot Mater / Bases | (+) | - | - |
| Flammability (UL94) | V0 | - | DIN IEC 60995-11-10 |
Regulatory & Compliance
Packaging & Availability
- Availability
Bars, tubes and plates.