Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
Each application requires the use of the appropriate type to obtain the desired properties in the final product. Like all thermoplastic products, it hardens in the cold and softens in the heat. For this reason, at low temperatures, its mechanical resistance increases and its impact resistance decreases. In the rigid state, it can be easily welded by a simple supply of heat (welding wedge, hot air current, high-frequency heating). Its welding is very resistant.
- Main Characteristics
- High chemical resistance.
- Easy hot soldering.
- Excellent machining.
- Greater rigidity with respect to polyolefins.
- Very low water absorption
- Easy to weld and bond
- Easy thermoformed
- Tough
- Good electrical insulation
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Industry Applications
- Chemical machines and tanks
- Battery separators
- Prototype models
- Tank linings
Properties
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Miscellaneous Properties
| Value | Units | Test Method / Conditions | |
| Modulus of Elasticity (In tension) | 3000.0 | MPa | DIN EN ISO 527-2 |
| Tensile Strength at Yield (50 mm/min) | 58.0 | MPa | DIN EN ISO 527-2 |
| Impact Strength (max. 7.5j) | No break | Kj/m² | DIN EN ISO 179-1EU |
| Ball Indentation Hardness | 82.0 | MPa | ISO 2039-1 |
| Elongation at Break | min. 15 | % | DIN 527 |
| Value | Units | Test Method / Conditions | |
| Service Temperature (Short term) | 70 - 80 | ºC | - |
| Service Temperature (Long term) | 60.0 | ºC | - |
| Thermal Expansion | 8.0 | 10⁻⁵ K⁻¹ | DIN 53483 |
| Specific Heat | 1.70 - 2.0 | J/(g+K) | ISO 22007-4:2008 |
| Thermal Conductivity | 0.159 | W/(K+m) | ISO 22007-4:2008 |
| Value | Units | Test Method / Conditions | |
| Density | 1.44 | g/cm³ | - |
| Value | Units | Test Method / Conditions | |
| Specific Volume Resistance | 10¹³ | Ω . cm | DIN IEC 60093 |
| Dielectric Strength (1 mm) | 39.0 | kV/mm | ASTM 149 |
| Value | Units | Test Method / Conditions | |
| Resistance To Weathering | Resistant in colour | - | - |
| Flammability (UL94) | B1 | - | DIN IEC 60995-11-10 |
Regulatory & Compliance
- Certifications & Compliance