Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Advantages
- Compatible with epoxies and similar topcoats that may lift other primers
- TriPrime (black) may also be used as a finish for wrought iron
- Excellent corrosion inhibition
- No critical recoat window
- Very fast dry
Applications & Uses
- Markets
- Applications
- Application Method
- Uses
Typical applications include construction and industrial equipment, structures, boxes and utility parts.
- Limitations
Requires clean steel
- Application Data
Surface Preparation:
TriPrime 902P Series primers are designed for use over hand cleaned iron and steel, SSPC-SP1, SP2 or SP3- Surface and ambient temperatures must be above 45° F. Recommended maximum surface temperature is 120° F. Temperatures above 95° F may require the use of a “slow” solvent. Contact Triangle for more information.
- Surfaces must be 100% free of all contaminants except small amounts of fully adherent rust. All loose and scaling material, grease, oils, asphalt, silicones, dirt, dust, chemical contaminants and moisture must be removed.
- Existing paint should be removed, SSPC-SP2 Completely sound paint may be left, but service life of new system will become that of the existing paint
- and that will be less than new products alone.
- Temperatures must be +5° F above dewpoint. Fresh primer must be protected from all moisture until rainproof as per chart above.
REQUIRED THINNING:
Designed for 25 - 30% reduction with 30-003 PCBTF in VOC regulated areas and 34-001 xylene in unregulated areas.
Thinner: 30-003 PCBTF or 34-001 Xylene
Brush or Roller: Thin as required
Airless Spray: Thin as required
Conventional Spray: Thin as required- Applications
This coating may be applied by conventional or airless spray application methods. Apply using crossing pattern.
Technical Details & Test Data
- Coverage
Theoretical at 1 mil DFT: 1108 sq ft/gal
Theoretical at 1.5 mils DFT: 738 sq ft/gal
Required Minimum DFT: 2 mils- Dry Schedule
DRY SCHEDULE: [at 50% RH and 2 mils DFT] 45°F 60°F 75° F 90°F Tack Dry 45 mins 20 mins 10 mins 30 mins Dry to Touch 2hrs 45 mins 30 mins | 20 mins Dry to Handle 5 hrs 3 hrs 2hrs 1.5 hrs Hard Cure 36 hrs. 30 hrs 24 hrs 22 hrs Recoat 50 mins 2 0 mins 10 mins 7 mins *After one week wash clean of all foreign matter. Light
sanding may be necessary if cured coating is subject to
exterior exposure for extended periods.- Tip Selection
High Volume Low Pressure Air Assisted Airless: Use fluid tip Size 011 - .013 Paint fluid pressure 600 - 650 psi Air pressure to Quin 75 - 80 psi Aircap pressure 10 psi maximum Conventional Air Spray: Use fluid tip Size 040 - .055 Paint fluid pressure 10 - 15 psi AirCap Pressure 65 - 75 psi High Volume Low Pressure Conventional Air: Use fluid tip Size 040 - .055 Paint fluid pressure 10 - 15 psi Air pressure to gun 75 - 80 psi Aircap Pressure 10 psi maximum Conventional Airless: Carbide fluid tip size 011-.015 @ 1800 psi. Electrostatic Equipment: Consult Trianale representative CLEANUP SOLVENT PCBTF or Xylene
Safety & Health
- Health and Safety
Caution:
CAUSES IRRITATION. DO NOT INGEST. Avoid contact with eyes and skin. Wash hands thorougly after using and before eating and smoking. If spillage occurs, absorb and dispose of according to local regulations.
First Aid:
Should eye contact occur, flush with plenty of water for at least 15 minutes and get medical attention if vision is disturbed. For skin, wash thoroughly with soap and water. lfswallowed, seek medical attention immediately. DO NOT induce vomiting.
KEEP THIS PRODUCT OUT OF THE REACH OF CHILDREN.
Packaging & Availability
- Order Code
TriPrime products are identified by the product series number, followed by an identifier (P=Primer) and ending in the color number.
TriPrime, Primer, Red Oxide (144-52): 902P109
TriPrime, Primer, Gray (AF-7): 902P609
TriPrime, Primer, Black (B385E): 902P710- Packaging
Four ea. 1 gallon cans per case: 55 lbs
One ea. 5 gallon metal pail: 67 lbs
Storage & Handling
- Shipping and Handling
SHIPPING DESCRIPTION: [CFR 49] Ground, Air, Vessel Paint, 3, UN1263, PG IIRequired Label FLAMMABLE LIQUIDRequired Marking PAINT UN1263 IMDG PACKAGING: FLAMMABLE LIQUID, class 3.2, UN1263, II IMDG STOWAGE. Category B UNIFORM FIRE CODE: [CFR 29] CLASS I-B STORAGE TEMPERATURE 120° F max SHELF LIFE: [warranted] 1 YEAR HMIS RATINGS H -2;F-3;R-0; PP-H