Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Features
- NMP-Free (NF), Low VOC (<100 g/L)
Applications & Uses
- Applications
- Coating Type
- Application Types
- Interior, Exterior, Automotive, Aircraft, Synthetic Leather, Paint, Graphic Arts, OPV, Paper, Textiles, Plastics - Flexible, Plastics - Rigid, Non-Woven
Properties
- Physical Form
- Appearance
- Opaque, Matte after curing
- Typical Properties
- Film Properties
Value | Units | Test Method / Conditions | |
Total Solids | 31 - 34 | — | — |
pH | 8.0 - 10.0 | — | — |
Viscosity at 25°C | 700 - 1500 | cps | — |
VOC | 21.68 | g/l | — |
VOC (Total Weight) | 2.19 | % | — |
Specific Gravity | 1.02 | — | — |
Gloss at 60°C | 0 - 2 | — | — |
Freezethaw Cycles | 0 | cycles | D2243 |
Harmonize tariff number | 3909.50.6000 | — | — |
Value | Units | Test Method / Conditions | |
Tensile | 2500 | psi | D-882 |
Tensile at 100% Elongation | 750 | psi | — |
Elongation | 550 | % | D-882 |
Cold crack | below -30 | °C | ISO 17233 |
Softening point | 180 | °C | — |
Pencil hardness | 6B | h | D-3363 |
Sward hardness | 6 | — | D-2134 |
Uv resistance (1000 hours at 340 nm) | No damage | — | D-4587 |
Impact resistance (Direct or Reverse) at 160 psi | N0 Damage | — | D-2794 |
Tabor abrasion (Loss) (CS-10, 1000 cycles) | 25 | mg | D-4060 |
Mandrel bend at 1/8 | Pass 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 1 | — | D-522 |
Dry Time | 60 | minutes | D-5895 |
Hydrolysis resistance (200 hours, 70ºc, 95% rh) | Retained 80% of tensile properties | — | — |
Hydrolysis resistance (200 hours, 70ºc, 95% rh) | Retained 80 | % | — |
Technical Details & Test Data
- Chemical Resistance Testing
Chemical Resistance Testing (D-1308):
- WATER: 5
- ACETIC ACID: 4
- AMMONIA: 4
- METHYL ETHYL KETONE: 3
- 2-PROPANOL: 3
- TOLUENE: 5
- GASOLINE: 5
- Various Substrate Cross-cut Adhesion
Various Substrate Cross-cut Adhesion (D-3359)
- COLD ROLL STEEL - UNPOLISHED: 5B
- ALUMINUM - UNTREATED: 5B
- BRASS - UNTREATED: 5B
- ABS - UNTREATED: 5B
- POLYCARBONATE - UNTREATED: 5B
- NYLON - UNTREATED: 4B
- HDPE - UNTREATED: 0B
Storage & Handling
- Shelf Life
- max. 12