Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Labeling Claims
- Industrial Additives Features
- Key Features
- When used as a coagulant, DelPAC® 3030 Polyaluminum Chloride can provide longer filter runs, reduce or eliminate the need for alkali pH adjustment chemistry, and reduce coagulant sludge residuals.
- Higher metal content than aluminum sulfate or ferric sulfate.
- Lower coagulant dosing will result in Less pH adjustment chemistry.
- Faster reaction and enhanced performance throughout water quality events.
Applications & Uses
- Markets
- Applicable Processes
- Use Level
- max. 250 mg/L
- Product Uses
- DelPAC® 3030 Polyaluminum Chloride coagulant is used for municipal drinking and wastewater treatment as well as for the treatment of industrial process water and wastewater
- Helps in removal of suspended and dissolved matter such as organics and phosphorus.
- Dosage Information
- DelPAC® 3030 Polyaluminum Chloride must be administered directly into raw water, wastewater, or stock flow using an appropriate acid-resistant dosing pump.
- It is advised against diluting the product before its administration.
- The dosing system should be set up to ensure thorough mixing.
- The ideal dosage should be determined on a case-by-case basis, such as through laboratory testing.
Properties
- Physical Form
- Appearance
- Clear to slightly hazy solution
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.26 - 1.32 | — | — |
| Freezing Point | -26.0 | °F | — |
| pH | 2.1 - 3.5 | — | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Delivery Options¹
Package Type Pounds Gallons Rail 180,000 16,720 Tank Truck² 45,000 4,180 IBC Tote 3,475 322 IBC Tote 2,875 267 Drum 575 53 - 1 Not all options are available at each production location
- 2 Tank Truck capacities can vary depending on configuration
Storage & Handling
- Storage Tanks and Piping Information
- Tanks may be constructed of fiberglass/epoxy, or lined steel.
- Polypropylene or polyethylene tanks have also been used.
- Schedule 80 PVC or polymer lined piping can be used.
- Glass reinforced plastic or hard rubber are also suitable materials for piping.